SAE J592-2000 pdf download Sidemarker Lamps for Use on Road Vehicles Less Than 2032 mm in Overall Width
1. Scope—This SAE Standard provides test procedures, requirements, and guidelines for sidemarker lamps for vehicles less than 2032 mm in overall width.
2. References
2.1 Applicable Publications—The following publications form a part of this specification to the extent specified herein. Unless otherwise indicated, the latest issue of SAE publications shall apply.
2.1 .1 SAE P UBLICATIONS —Available from SAE, 400 Commonwealth Drive, Warrendale, PA 1 5096-0001 .
SAE J567—Lamp Bulb Retention System
SAE J575—Test Methods and Equipment for Lighting Devices and Components for Use on Vehicles Less than 2032 m in Overall Width
SAE J576—Plastic Materials for Use in Optical Parts Such as Lenses and Reflex Reflectors of Motor Vehicle Lighting Devices
SAE J578—Color Specification
SAE J759—Lighting Identification Code
SAE J1 889—L.E.D. Lighting Devices
SAE J2042—Clearance, Sidemarker, and Identification Lamps for Use on Motor Vehicles 2032 mm or More in Overall Width
SAE J21 39—Test for Lighting Devices and Components used on Vehicles 2032 mm or More in Overall Width
2.2 Related Publications—The following publications are provided for information purposes only and are not a required part of this document.
2.2.1 SAE P UBLICATIONS —Available from SAE, 400 Commonwealth Drive, Warrendale, PA 1 5096-0001 .
SAE J387—Terminology—Motor Vehicle Lighting
2.2.2 NHTSA P UBLICATION —Available from the Superintendent of Documents, U. S. Government Printing Office, Mail Stop: SSOP, Washington, DC 20402-9371 . www.nhtsa.dot.gov.
Code of Federal Regulations 49 – Part 571 .1 08 FMVSS 1 08
3. Definitions
3.1 Sidemarker Lamps—Lighting devices used to indicate the presence and length of the vehicle when viewed from the side.
4. Lighting Identification Code—Sidemarker lamps which meet the requirements of this document may be identified by the code “P2” in accordance with SAE J759.
5. Tests
5.1 SAE J575 and SAE J1 889 are a part of this document. The following tests are applicable with the modifications as indicated. Alternatively, sidemarker lamps may be tested according to SAE J21 39.
5.1 .1 V IBRATION
5.1 .2 M OISTURE
5.1 .3 D UST
5.1 .4 C ORROSION
5.1 .5 P HOTOMETRY
5.1.5.1 The photometric tests shall be made at a distance of at least 3 m between the lighting device and the photometer.
5.1.5.2 The H-V axis of a sidemarker lamp in a position as it will be mounted on a vehicle shall be taken as perpendicular to a vertical plane passing through the longitudinal axis of the vehicle.
5.1 .6 W ARPAGE
5.2 Color—SAE J578 is a part of this document.
5.3 Plastic Materials—SAE J576 is part of this document.
6. Requirements
6.1 Performance Requirements—The device when tested in accordance with the test procedures of this document shall meet the requirements of SAE J575 and, if applicable, SAE J1 889. Alternatively, if tested according to SAE J21 39, sidemarker lamps shall meet the requirements of SAE J21 39.
NOTE—Sidemarkers conforming to requirements of SAE J2042 meet requirements of SAE J592.
6.1 .1 V IBRATION
6.1 .2 M OISTURE
6.1 .3 D UST
6.1 .4 C ORROSION
SAE J592-2000 pdf download
PS:Thank you for your support!
