SAE J588-2000 pdf download Turn Signal Lamps for Use on Motor Vehicles Less than 2032 mm in Overall Width
Scope-This SAE Standard provides test procedures, requirements, and guidelines for turn signal lampsintended for use on vehicles of less than 2032 mm in overall width.
2References
2.1Applicable Publications–The following publications form a part of this specification to the extent specifiedherein. Unless otherwise indicated, the latest issue of SAE publications shall apply.
2.1.1SAE PUBLICATIONS-Available from SAE, 400 Commonwealth Drive, Warrendale, PA 15096-0001.
SAE J567-Lamp Bulb Retention SystemSAE J575Tests for Motor Vehicle Lighting Devices and ComponentsSAE J576-Plastic Materials for Use in Optical Parts Such as Lenses and Reflectors of Motor VehicleLighting DevicesSAEJ578-Color SpecificationSAE J579Lighting Code ldentificationSAE J1050-Describing and Measuring the Driver’s Field of View
2.2Related Publications–The following publications are provided for information purposes only and are not arequired part of this document.
2.2.1SAE PUBLICATIONS-Available from SAE, 400 Commonwealth Drive, Warrendale, PA 15096-0001.
SAE J222-Parking Lamps (Front Position Lamps)SAE J585-Tail Lamps (Rear Position Lamps) for Use on Motor Vehicles Less Than 2032 mm in OverallWidthSAE J586 FEB84-Stop Lamps for Use on Motor Vehicles Less Than 2032 mm in Overall WidthSAE J588 NOV84–Turn Signal Lamps for Use on Motor Vehicles Less Than 2032 mm in Overall WidthSAE J592-Clearance, Side Marker, and ldentification LampsSAEJ594-Reflex ReflectorsSAE J1395 MAY85-Front and Rear Turn Signal Lamps for Use on Motor Vehicles 2032 mm or More inOverall WidthSAE J1398-Stop Lamps for Use on Motor Vehicles 2032 mm or More in Overall Width
SAE J1957-Central High Mounted Stop Lamp Standard for Use on Vehicles Less than 2032 mm OverallWidthSAE J2040-Tail Lamps (Rear Position Lamps) for Use on Vehicles 2032 mm or More in Overall WidthSAE J2042-Clearance, Sidemarker, and ldentification Lamps for Use on Motor Vehicles 2032 mm orMore in Overall Width
2.2.2NHTSA PUBLICATION-Available from the Superintendent of Documents, U.S. Government Printing OfficeWashington,DC 20402.
FMVSS108 56 FR 64733-64737
Definitions
Turn Signal Lamps The signalling elements of a turn signal system which indicate an intention to turn by3.1giving a flashing light on the side toward which the turn will be made.
Lighting identification Code–Turn signal lamps for use on vehicles less than 2032 mm in overall width maybe identified by the codes l, 12, 13, 14, r 15 in accordance with SAE J759.
Tests
SAE J575 is a part of this document. The following tests are applicable with modifications as indicated.
ViBRATION TeST
5.1.2MOISTURE TEST
5.1.3DuST TEST
5.1.4CORROSION TEST
5.1.5PHOTOMETRY TEsT
5.1.5.1Photometric measurements shall be made with the light source of the signal lamp at least 3 m from thephotometer. The H-V axis shall be taken as parallel to the longitudinal axis of the vehicle.
5.1.5.2 Photometric measurements shall be made with the bulb filament steadily burning.Photometricmeasurements of multiple compartment lamps or multiple lamp arrangements shall be made by either ofthe following methods by aligning the axis of each lamp or compartment with the photometer:
All compartments or lamps shall be photometered together provided that a line from the light source ofeach compartment or lamp to the center of the photometer sensing device does not make an angle ofmore than 0.6 degree with the photometer H-V axis. When compartments or lamps are photometeredtogether, the H-V axis shall intersect the midpoint between their light sources.
Each compartment or lamp shall be photometered separately. The photometric measurement for theentire multiple compartment lamp or multiple lamp arrangement shall be determined by adding thephotometric outputs from each individual lamp or component at corresponding test points.
SAE J588-2000 pdf download
PS:Thank you for your support!
