SAE J585-2000 pdf download (R)Tail Lamps (Rear Position Lamps) for Use on Motor Vehicles Less Than 2032 mm in Overall Width
Scope-This SAE Standard provides test procedures, requirements, and guidelines for tail lamps (rearposition lamps).
2References
2.1Applicable Publications–The following publications form a part of this specification to the extent specifiedherein. Unless otherwise specified, the latest issue of SAE publications shall apply.
SAE J567-Lamp Bulb Retention SystemSAE J575Tests for Motor Vehicle Lighting Devices and ComponentsSAE J576-Plastic Materials for Use in Optical Parts Such as Lenses and Reflectors of Motor VehicleLighting DevicesSAE J578-Color Specification
SAE J759-Lighting ldentification Code
SAE J2040-Tail Lamps (Rear Position Lamps) for Use on Vehicles 2032 mm or More in Overall Width
Related Publications–The following publications are provided for information purposes only and are not a2.2required part of this document.
2.2.1SAE PUBLICATIONS-Available from SAE, 400 Commonwealth Drive, Warrendale, PA 15096-0001.
SAE J586 FEB84-Stop Lamps for Use on Motor Vehicles Less Than 2032 mm in Overall WidthSAE J588 NOV84-Turn Signal Lamps for Use on Motor Vehicles Less Than 2032 mm in Overall WidthSAE J594-Reflex ReflectorsSAE J1395 APR85-Front and Rear Turn Signal Lamps for Use on Motor Vehicles 2032 mm or More inOverall WidthSAE J1398 MAY85Stop Lamps for Use on Motor Vehicles 2032 mm or More in Overall WidthSAE J1957-Central High Mounted Stop Lamp Standard for Use on Vehicles Less than 2032 mm OveralWidth
SAE J2042-Clearance, Sidemarker, and ldentification Lamps for Use on Motor Vehicles 2032 mm orMore in Overall Width
2.2.2FMVSS SPECIFICATION-Available from the Superintendent of Documents, U.S. Government Printing Office.
Washington,D.C.20402.
FMVSS 108 (56 FR 64733 – 64737)-Lamps, Reflective Devices, and Associated Equipment
Definitions
3.1Tail Lamps-Lamps used to designate the rear of a vehicle by a steady burning low intensity light
3.2Multiple Compartment Lamp-A device which gives its indication by two or more separately lighted areaswhich are joined by one or more common parts such as a housing or lens.
3.3Multiple Lamp Arrangement–An array of two or more separated lamps on each side of the vehicle whichoperate together or give a signal.
Lighting ldentification Code-Tail lamps may be identified by the code “T” in accordance with SAE J759
Tests
5.1SAE J575 is a part of this report, The following tests are applicable with the modifications as indicated:
5.1,1VIBRATION TEST
5.1.2MOISTURE TEsT
5.1.3DUST TEST
5.1.4CORROSION TEST
PHOTOMETRY TEST-n addition to the test procedure in SAE J575, the following apply:5,1.5
5.1.5.1Photometric measurements shall be made with the liaht source of the lamp at least 3 m from thephotometer, The H-V axis shall be taken as parallel to the axis of reference of the lamp as mounted on thevehicle.
5.1.5.2Photometric measurements shall be made with the bulb filament steadily burning. Photometricmeasurement of multiple compartment lamps or multiple lamp arrangements shall be made by either of thefollowing methods:
5.1.5.2.1All compartments or lamps shall be photometered together provided that a line from the light source ofeach compartment or lamp to the center of the photometer sensing device does not make an angle ofmore than 0.6 degree with the photometer H-V axis. When compartments or lamps are photometerectogether, the H-V axis shall intersect the midpoint between their light sources.
5.1.5.2.2
Each compartment or lamp shall be photometered separately by aligning the axis of each lamp oicompartment with the photometer. The photometric measurement for the entire multiple compartmentamp or multiple lamp arrangement shall be determined by adding the photometric outputs from eachindividual lamp or component at corresponding test points
5.1.6 WARPAGE TEST FOR DEVICES WITH PLASTIC COMPONENTS
SAE J585-2000 pdf download
PS:Thank you for your support!
