SAE AS 81044-7-2000 pdf download WIRE, ELECTRIC, CROSSLINKED POLYALKENE INSULATED, SILVER-COATED HIGH STRENGTH COPPER ALLOY, NORMAL WEIGHT, 600-VOLT, 1 50°C
TEMPERATURE RATING: 150C (302F) MAX CONDUCTOR TEMPERATURE
VOLTAGE RATING: 600 VOLTS(RMS) AT SEA LEVEL
ACCELERATED AGING: OVEN TEMPERATURE,300 2C 572 3.6F) FOR 6 HOURS: FOR IDENTIFICATIONLEGIBILITY,225 2C(437 3.6F) FOR 6 HOURS
BLOCKING: 225 2C(437 3.6F)
COLOR: IN ACCORDANCE WITH MIL-STD-104,CLASS 1: WHITE PREFERRED
FLAMMABILITY: 30 SECONDS (MAX): 3.0 INCHES (MAX): NO FLAMING OF TISSUE PAPER
HUMIDITY RESISTANCE: 5000 MEGOHMS FOR 1000 FT,MIN INSULATION RESISTANCE AFTER HUMIDITYEXPOSURE
DENTIFICATION, STRIPING.OR BANDING DURABILITY: 125 CYCLES (250 STROKES) (MIN),500 GRAMS WEIGHT
IMPULSE DIELECTRIC TEST:
PRIMARY INSULATION (WHEN TEST IS USED IN LIEU OF SPARK TEST): 6.0 KILOVOLTS (PEAK),100% TESTFINISHED WIRE: 8.0 KILOVOLTS(PEAK),100% TEST
INSULATION RESISTANCE: 5000 MEGOHMS FOR 1000 FT (MIN)
LIFE CYCLE: OVEN TEMPERATURE, 200 2C (392 3.6F) FOR 168 HOURS
PHYSICAL PROPERTIES OF PRIMARY INSULATION:TENSILE STRENGTH,2500 PSI(MIN)ELONGATION,150%(MIN)
POLYIMIDE CURE TEST: NOT APPLICABLE
PROPELLANT RESISTANCE: TEST REQUIRED
SHRINKAGE: 0125INCH MAX AT 300 2C(572 36F)
SMOKE: 200 2C(392 3.6F)
SPARK TEST OF PRIMARY INSULATION: 3000 VOLTS(RMS),60Hz,100% TESTSURFACE RESISTANCE: 500 MEGOHMS-INCHES (MIN),INITIAL AND FINAL READINGSTHERMAL SHOCK:OVEN TEMPERATURE，150 +2C(302 3.6F)MAX CHANGE IN MEASUREMENT: 0060 INCH
WET DIELECTRIC TEST: 2500 VOLTS (RMS)
WICKING: 2.25 INCHES(MAX)
WRAP TEST: MANDREL WRAP TEST REQUIRED
SAE AS 81044-7-2000 pdf download
PS:Thank you for your support!
