SAE AS 39029-98-2000 pdf download CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, COAXIAL, SIZE 1 (FOR DOD-C-83527 CONNECTORS)
REQUIREMENTS:
Dimensions and configuration: See figure 1 and table I.
Mating contact: MIL-C-39029/97A.
Materials:
Body: Brass, half-hard or copper-beryllium.
Insulator: MIL-P-1 9468.
Crimp ferrule: Copper, annealed.
Gasket: Silicone rubber.
Plating: Gold as required for MIL-C-39029, type D contacts.
Performance:
Temperature range: -65°C to +1 65°C.
Impedance: 50 ohms nominal.
VSWR: 1 .70:1 maximum.
Frequency range: 0 to 5 GHz.
Insertion loss: 0.3 dB.
Contact resistance:
Outer contact: 0.2 milliohm maximum.
Inner contact: 1 .0 milliohm maximum.
Rated voltage: 1 ,000 V rms at sea level.
Dielectric withstanding voltage: 2,500 V rms at sea level.
Insulation resistance: 5,000 megohms minimum.
Cable retention: 1 25 pounds minimum.
Shock: Test condition D per method 2004 of MIL-STD-1 344.
Vibration: Test condition VI, letter J, per method 2005 of MIL-STD-1 344. Directions shall be longitudinal and perpendicular. Time duration shall be 8 hours in each direction.
Installation and removal: Installation and removal of contact shall be per manufacturer recommended instructions.
Shipping: Figure 1 illustrates final assembly; parts are to be shipped unassembled in a suitable container. Manufacturer recommended assembly instructions shall be shipped with each unit package.
QPL evaluating activity: Defense Electronics Supply Center (DESC-E), Dayton, OH 45444.
Part number: M39029/98-548.

Share on Facebook

Post on X

Follow us

Save