PD IEC PAS-60936-5:2003 pdf download Maritime navigation and radiocommunication equipment and systems — Radar — Part 5: Guidelines for the use and display of AIS information on radar
Scope
This document specifies the minimum operational and performance requirements, methods oftesting and required test results and the effect on extant standards, that are recommended tobe complied with for optional equipment conforming to lnterim Operational Guidelines notinferior to those adopted by the lMO in SN/Circ.217 (11 July 2001) – nterim quidelines for thepresentation and display of AlS target information. The scope is further restricted torequirements for superimposition of selected parts of AlS information on radar systems. Alltext of this standard, which is identical to that in IMO SN/Circ.217 is printed in italics and thecircular and paragraph numbers are indicated in brackets, for example -(C.21713.3)
The interim guidelines dea/ with the graphical presentation, alphanumeric information and thedisplay of A/S target data in standalone or integrated navigational aids or systems and areconsidered as an interim performance guideline, They should be replaced by the appropriateperformance standards after experience has been gained.(C.21712)
The fusion of AlS and radar plotting (RP) data and information is not detailed in this guidelineas it is only permitted when the functionality meets the requirements of an IntegratedNavigation System’ as specified in the relevant IMO Performance Standards.
2 Application
2.1Intended use of these guidelines
These guidelines are intended to apply to all SOLAS ship’s radar and radar plotting displayscomplying to IMO MSC.64(67) Annex 4,IMO A820(19)’) and IMO A823(19))
2.2Intended application of these guidelines
The application of these Guidelines is intended to reduce OoW workload, provide commontraining and enhance situation awareness for safety.
2.3Effects of these guidelines on existing radar
The effect of these guidelines on the extant radar and radar plotting standards is given inAnnex A.
3Normative references
The following referenced documents are indispensable for the application of this document.For dated references, only the edition cited applies. For undated references, the latest editionof the referenced document (including any amendments) applies.
IEC 60872-1:1998,Maritime navigation and radiocommunication equipment and systems -Radar plotting aids – Part 1: Automatic radar plotting aids (ARPA) – Methods of testing andrequired test results
4Definitions and abbreviations
4.1Definitions
4.1.1AIS Symbol 1 – Sleeping targettarget symbol indicating the presence and orientation of a vessel equipped with AIS in acertain location. No addiional information is presented until AlS targets are activated, thusavoiding information overload.(C217/1)
4.1.2
AIS Symbol 2a,b,c – Activated targetsymbol representing the automatic or manual activation of a sleeping target for the display ofadditional graphically presented information,including:
a vector (speed and course over ground or water) (2a);
the heading (2a); and
PD IEC PAS-60936-5:2003 pdf download
PS:Thank you for your support!
