PAS 61169-4:2006 pdf download Radio-frequency connectors — Part 4: Sectional specification — Radio-frequency coaxial connectors with inner diameter of outer conductor 16 mm (0,63 in) with screw lock — Characteristic impedance 50 ? (type 7-16)
4.4.1Quality conformance inspection
This shall consist of test groups A1 and B1 on a lot-by-lot basis
4.4.2Qualification approval and its maintenance
This shall consist of three consecutive lots passing test groups A1 and B1 followed byselection of specimens from the lots as appropriate, These specimens shall successfully passthe specified periodic D tests.
5 Instructions for the preparation of detail specifications5.1General
Detail specifications (DS) writers shall use the appropriate BDS pro forma. The followingpages comprise the pro forma BDS specified for use with type 7-16 connectors. As such, iwill already have entered on it information relating to
a) the basic specification number applicable to all the detail specifications coveringconnector styles of the type covered by the sectional specification;b) the connector series designation.
The specification writer should enter the details relating to the connector style/variant (s) tobe covered as indicated. The numbers in brackets on the BDS pro forma correspond to thefollowing indications which shall be given.
5.2Identification of the detail specification
1) The name of the National Standards Organization (NSO) under whose authority the DS ispublished and, if applicable, the organization from whom the DS is available.
2) The relevant mark of conformity and the number allotted to the DS by the relevant nationaor international organization authorizing the DS.
3) The number and issue number of the lEC/ECQ generic or sectional specification asrelevant; also national reference if different.
4) If different from the lEC/IECQ number, any national number of the DS, date of issue andany further information required by the national system, together with any amendmentnumbers.
5.3Identification of the component
5) Enter the following details
Style: The style designation of the connector including type of fixing and sealing, ifapplicableAttachment: By deletion of the inapplicable options of cable/wire: given for centre and
outer conductors
Special features and markings : As applicable
Series designation: in bold characters/digits approximately 15 mm high6) Enter details of assessment level and the climatic category.
7) A reproduction of the outline drawing and details of the panel piercing, if applicable. ltshall provide the maximum envelope dimensions, also the position of the reference planeand, in the case of a fixed connector, the position of the mounting plane (s) relative to thefront face of the connector.
Any maximum panel thickness limitations for fixed connectors shall be stated.
8) Particulars of all variants covered by the DS. As appropriate, the information shall include
• cable types (or sizes) applicable to each variant;
• alternative plated or protective finishes;
• details of alternative mounting flanges having either tapped or plain mounting holes;

Share on Facebook

Post on X

Follow us

Save