PAS 35:2002 pdf download Specification for wheeled sports facilities
1 Scope
This PAS specifies requirements for facilities for unpowered skateboarding, in-line skating, roller skatingand BMXriding,installed in unsupervised areas. These facilities include manufactureditems such as railsramps and pipes on which a wheeled device such as a skateboard or other roller sport equipment can beused.
It applies to ramps and general riding surfaces, and to fixed and movable streetcourse equipment.It does not apply to competition facilities or to commercially operated facilities.NOTE 1 Annex A.Annex B.Annex C and Annex D give guidance and recommendations concerning the ocation ofthe site, materials.ancillary itemsand inspection and maintenance
NOTE 2 Annex E. Annex ,Annex G and Annex H show examples of typical types of equipment referred to in this PAS
2 Normative references
The following referenced documents are indispensable for the application of this document. For datedreferences, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments)applies.BS 2782-10:Method 1001:1977, Methods of testing plastics — Part 10: Glass reinforced plasticsMethod 1001: Measurement of hardness by means of a Barcol impressor.BS 4987-1, Coated macadam (asphalt concrete) for roads and other paved areas — Part 1: Specification forconstituent materials and for mixtures.
BS 4987-2, Coaled macadam (asphalt concrete) for roads and other paved areas – Part 2: Specification fortransport.laving and compaction.
BS 5328-2, Concrete – Part 2: Methods for specifying concrete mixes.
BS 5328-4, Concrete — Part 4: Specification for the procedures to be used in sampling, testing and assessing
compliance of concrete.
BS 8110-1:1997,Structural use of concrete — Part 1: Code of practice for design and construction.BS EN 335-2:1992, Hazard classes of wood and wood-based products against biological attackPart 2: Guide to the application of hazard classes to solid wood.BS EN 350-2:1994, Durability of wood and wood-based products – Natural durability of solid woodPart 2: Guide to natural durability and treatability of selected wood species of importance in Europe.BS EN 351-1:1996, Durability of wood and wood-based products – Preservative-treated solid wood -Part 1: Classification of preservative penetration and retention.BS EN 636-3, Plywood- Specifications – Part 3: Reguirements for plywood for use in exterior conditionsBS EN 1176-1:1998, Playground equipment — Part 1: General safety requirements and test methodsBS ENISO 5470-1, Rubber or plasticscoated fabrics — Determination ofabrasion resistance — Part l:Taber abrader.
3 Terms and definitions
For the purposes of this PAS, the following definitions apply.
8.1
facilityarea dedicated to the use of unpowered skateboards, roller skates or similar roller-sport equipment, andBMX cycles, and which comprises a constructed riding surface including ramps and other structures
3.2
streetcourse equipmentitems other than half-pipes which may be used for wheeled sports
3.3
competition facility
facilities which are only accessible to a limited circle of people for the duration of a competition under the supervision of the event organizer

Share on Facebook

Post on X

Follow us

Save