Todau i will share ISO 21420:2020 pdf,the title is Protective gloves — General requirements and test methods.
This document is a reference standard to be referred to as appropriate by the specific standards
relevant or applicable to protective gloves.
ISO 21420:2020 can apply to arm protectors and gloves permanently incorporated in containment enclosures.
The protective glove shall be designed and manufactured so that in the foreseeable conditions of use,the wearer can perform the activity as normally as possible with an appropriate protection. This document along with the appropriate specific standards shall be used to verify this adequation.
If required in the relevant specific standard (for example ISO 16073: 2011, 5.7.3),the glove shall be designed to minimize the donning and doffing time.
For reusable multilayer gloves, the gloves shall be able to be doffed without separation of the layers of the fingers. When the glove construction includes seams, the material and strength of the seam shall be such that the overall performance of the glove is not significantly decreased as required in the relevant specific standards.
Test methods and requirements are stated in the specific standards listed in the Bibliography. The number of samples shall be as stated in the specific standard. If the standard requests at least x samples then x samples shall be tested.For uncertainties of measurement, see Annex D.
ISO 21420:2020 pdf download
PS:Thank you for your support!
