IEEE 1547.1- 2005 pdf download IEEE Standard Conformance Test Procedures for Equipment Interconnecting Distributed Resources with Electric Power Systems
1. Overview
This standard provides tests and procedures for verifying conformance of interconnection systems (ICSs) toEEE Std 1547r,’ It is recognized that an ICS can be a single device providing all required functions or anassembly of components, each having limited functions. Components having limited functions shall betested for those functions in accordance with this standard. Conformance may be established through combi-nation of type (referred to as “design tests in IEEE Std 1547), production, and commissioning tests.Additionally, conformance to IEEE Std 1547 requires interconnection installation evaluation and periodictests.
This standard also includes Annex A, which describes test signals and ramp functions used in conductingsome tests. Additionally. a bibliography is included as Annex B: it lists documents that are referred to in thisstandard for informative purposes, but that are not required to implement the procedures defined in thisstandard.
1.1 Scope
This standard specifies the type, production, and comissioning tests that shall be performed to demonstratethat the interconnection functions and equipment of the distributed resources (DR) conform to IEEEStd 1547.
1.2 Purpose
Interconnection equipment that connects DR to an electric power system (EPS) must meet the requirementsspecified in IEEE Std 1547.Standardized test procedures are necessary to establish and verify compliancewith those requirements. These test procedures must provide both repeatable results. independent of testlocation, and flexibility to accommodate the variety ofDR technologies.
1.3 Limitations
This standard does not cover testing for safety.
Although this standard does not define a certification process. these tests may be used as part of such aprocess.
2. Normative references
The following referenced documents are indispensable for the application of this standard. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document(including any amendments or corrigenda) applies.
The applicability of the following standards is determined by the specific requirements stated in this stan:dard, such as requiring certain sections.
ANSI C37.06. American National Standard for AC High-Voltage Circuit Breakers Rated on a SymmetricalCurrent Basis-Preferred Ratings and Related Required Capabilities.
ANSI C84.1,American National Standard for Electric Power Systems and Equipment–Voltage Ratings(60 Hz).
IEEE C37.09TM,IEEE Standard Test Procedure for AC High-Voltage Circuit Breakers Rated on a Symmet3，4rical Current Basis.
IEEE Std C37.90.1TM, IEEE Standard for Surge Withstand Capability (SWC) Tests for Relays and RelaySystems Associated with Electric Power Apparatus.
IEEE Std C37.90.2TM,IEEE Standard for Withstand Capability of Relay Systems to Radiated Electromagnetic Interference from Transceivers.
EEE Std C62.41.2TM,IEEE Recommended Practice on Characterization of Surges in Low-Voltage (1000 Vand Less)AC Power Circuits.
IEEE Std C62.45TM,IEEE Recommended Practice on Surge Testing for Equipment Connected to Low.
Voltage(1000 V and Less) AC Power Circuits.
IEEE 1547.1- 2005 pdf download
PS:Thank you for your support!
