IEC PAS 61076-3-115:2005 pdf download Connectors for electronic equipment – Part 3-115: Rectangular connectors – Protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface – Variant 12 related to IEC 61076-3-106 – Push-pull type
General data
1.1Scope
This Publicly Available Specification (PAS) covers protective housinas for uparading existind8-way shielded and unshielded connectors utilizing the interface described in IEC 60603-7-2EC 60603-7-3IEC 60603-7-4,IEC 60603-7-5, and IEC 60603-7-7 to P65 and iP67 ratingsaccording to lEC 60529,for use in industrial environments
The housings cover a variety of different locking mechanisms according to this PAS and avariety of different mounting configurations and termination types which are detailed in lEC60603-7.
Common mating configurations for all variants are defined in IEC 60603-7. The matingdimensions for the housings under Clause 3 allow the mating conditions according to lEC60603-7 to be fulfilled.
The fully assembled variants (connectors) described in this PAS incorporate fixed and freeconnectors which are fully compliant with IEC 60603-7
1.2Normative references
The following referenced documents are indispensable for the application of this documentFor dated references, only the edition cited applies. For undated references, the latest editionof the referenced document (including any amendments) applies.
EC 60050-581:1978,International Electrotechnica/ Vocabulary (IEV) – Chapter 581: Electro-mechanical components for electronic equipment
IEC 60068-1，Environmental testing – Part 1: General and guidance
EC 60068-2-14, Environmental testing – Part 2: Tests – Test N: Change of temperature
EC 60068-2-30, Environmental testing – Part 2-30: Tests – Test Db: Damp heat, cyclic (12 h+12 h) cycle
IEC 60512-1, Connectors for electronic equipment – Tests and measurements – Part 1:General
IEC 60512-1-100, Connectors for electronic eguipment – Tests and measurements – Part 1-100: Applicable publications2
IEC 60529,Degree of protection provided by enclosure (IP Code)
EC 60603-7, Connectors for frequencies below 3 MHz for use with printed boards – Part 7:Detail specification for connectors, 8-way, including fixed and free connectors with commonmating features,with assessed quality
EC 60603-7-1, Connectors for electronic equipment – Part 7-1: Detail specification for 8-way.shielded free and fixed connectors with common mating features, with assessed quality
IEC 60603-7-2, Connectors for electronic equipment – Part 7-2: Detail specification for 8-wayunshielded. free and fixed connectors for data transmission with freauencies up to 100 MHz3
EC/PAS 60603-7-3, Connectors for electronic equipment – Part 7-3: Detail specification for 8.way, shielded, free and fixed connectors, for data transmissions with frequencies up to 100MHz
EC 60603-7-4, Connectors for electronic equipment – Part 7-4: Detail specification for 8-wayunshielded, free and fixed connectors for data transmission with frequencies up to 250 MHz
EC 60603-7-5, Connectors for electronic equipment – Part 7-5: Detail specification for 8-way.shielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz4
EC 60603-7-7, Connectors for electronic equipment – Part 7-7: Detail specification for 8-way.shielded, free and fixed connectors, for data transmissions with frequencies up to 600 MHz
EC 60664-1，Insulation coordination for equipment within low-voltage systems – Part 1:Principles，requirements and tests
EC 61076-1, Connectors for electronic equipment – Part 1: Generic specification
EC 61156-2, Multicore and symmetrical pair/quad cables for digital communications – Part 2:Horizontal floor wiring – Sectional specification
EC 61156-3,Multicore and symmetrical pair/quad cables for digital communications – Part 3:Work area wiring – Sectional specification
EC 61156-4,Multicore and symmetrical pair/guad cables for digital communications – Part 4:Riser cables -Sectional specification
IEC type designation1.3
Protective housings and connectors in protective housings according to this PAS shall bedesignated by the following system.
IEC PAS 61076-3-115:2005 pdf download
PS:Thank you for your support!
