IEC 60034-6:1991 standard

01-11-2021 comment

IEC 60034-6:1991 pdf download.Rotating electrical machines – Part 6: Methods of cooling (IC Code).
IEC 60034-6:1991 identifies the circuit arrangements and the methods of movement of the coolant in rotating electrical machines, classifies the methods of cooling and gives a designation system for them.
The designation of the method of cooling consists of the letters”IC”, followed by numerals and letters representing the circuit arrangement, the coolant and the method of movement of the coolant.
A complete designation and a simplified designation are defined. The complete designa tion system is intended for use mainly when the simplified system is not applicable.
The complete designations, as well as the simplified designations, are illustrated in the tables of annex A for some of the most frequently used types of rotating machines together with sketches of particular examples.
For the purpose of this part, the following definitions apply.
2.1 cooling: A procedure by means of which heat resulting from losses occurring in a machine is given up to a primary coolant which may be continuously replaced or may itself be cooled by a secondary coolant in a heat exchanger.
2.2 coolant: A medium, liquid or gas, by means of which heat is transferred.
2.3 primary coolant: A medium, liquid or gas which, being at a lower temperature than a part of a machine and in contact with it, removes heat from that part.
NOTE – A machine may have more than one primary coolant.
2. 4 secondary coolant: A medium, liquid or gas which, being at a lower temperature than the primary coolant, removes the heat given up by this primary coolant by means of a heat exchanger or through the external surface of the machine.IEC 60034-6:1991 pdf download.

                                           Related Information                                             Download
PS:Thank you for your support!
AS NZS 60947.5.9:2015 pdf download AS Standards

AS NZS 60947.5.9:2015 pdf download

AS NZS IEC 60947.5.9:2015 pdf download.Low-voltage switchgear and controlgear Part 5.9: Control circuit devices and switching elements——Flow rate switches. 8.3.3.2.2 Time delay before availability The test is performed with the flow rate switch connected to a test...
Read More
AS 60990:2018 pdf download AS Standards

AS 60990:2018 pdf download

AS IEC 60990:2018 pdf download.Methods of measurement of touch current and protective conductor current. 4.2 Test transformer The use of a test transformer for isolation is optional. For maximum safety, a test transformer for isolation (T2 in...
Read More
IEC 60674-1:1980 IEC Standards

IEC 60674-1:1980

IEC 60674-1:1980 pdf download.Specification for plastic films for electrical purposes - Part 1: Definitions and general requirements. INTRODUCTION This standard is one of a series which deals with plastic films for electrical purposes. The series will consist...
Read More

LEAVE A REPLY

Anonymous netizen Fill in information