EN 62264-3-2017 pdf download.Enterprise-control system integration – Part 3: Activity models of manufacturing operations management (IEC 62264-3:2016).
This EN 62264-3 defines four formal models: production operations management, maintenance operations management, quality operations management and inventory operations management. These are detailed in Clauses 6, 7. 8 and 9 and are listed below.
a) The production operations management model, which shall include the activities of production control (3.0) that operate as Level 3 functions and the subset of the production scheduling (2.0) that operate as Level 3 functions and as defined in Part 1.
b) The maintenance operations management model, which shall include the activities of maintenance management (10.0) that operate as Level 3 functions.
c) The quality operations management model, which shall include the activities of quality assurance (6.0) that operate as Level 3 functions.
d) The inventory operations management model, which shall include the activities of management of Inventory and material including product inventory control (7.0) and material and energy control activities (4.0) defined as operating as Level 3 functions and as shown in the Manufacturing Operations Management Model in Part 1.
NOTE 1 The numbers In parenthesis – refer to the functional model depicted In Part 1
NOTE 2 Other categories of operations management can exist depending on company policy or organization.
They are not formally modelled in this standard but they can make use of the generic standard model.
5 Structuring models
5.1 Generic template for categories of manufacturing operations management
5.1.1 Template for management of operations
A generic model for management of operattons shall be used as a template to define the production operations management, maintenance operations management, quality operations management and inventory operations management models. This model is shown in Figure 2. This generic model is extended for each specific area in later clauses.
NOTE The fine details of the generic model are different for each of the manufacturing operations management
areas.
5.1.2 Use of the generic model
The generic model is instantiated for the four categories listed in 5.1.1. However, this same template may be instantiated for other possible manufacturing operations categories or for other operations areas within the enterprise.
EXAMPLE 1 A company could apply the model to receiving operations management and shipping operations management where these are separately managed
EXAMPLE 2 A company could apply the model to cleaning and sterilization operations management, where these are separately managed.
5.2.2 Handling resources within the generic activity models
Information about resources (materials, personnel, physical assets, and equipment) may be handled within any one of the four activity models of manufacturing operations (production. quality, maintenance and inventory) presented in this standard.
Although data for different resources may be found in different models, there are primary reporting paths through which information should be obtained.
a) Personnel information specific to each activity model may be obtained from the specific activity model.
b) Equipment information specific to each activity model may be obtained from the specific activity model.
c) Material information specific to each activity model may be obtained from the specific activity model. However, material inventory information, including finished goods and raw materials, may be obtained from the inventory activity model. Material movement operations may be managed by activities In the production, quality, maintenance, or inventory activity models. A specific material movement instance only exists within one activity model at any given point in time.
d) Physical asset information specific to each activity model may be obtained from the specific activity model.
5.2.3 Scheduling Interactions
An activity in a detailed activity model has interactions with other activities in the same model and interactions with equivalent activities in other activity models. Interactions within each activity model are described In Clauses 6, 7, 8 and 9.
There are many interactions associated with detailed scheduling between activity models because of the need to coordinate between many work tasks assigned to a same resource on a given time interval. Also, the definitions of work tasks in the different types of operations management are closely related.
Clear definition of interactions between detailed production scheduling, detailed inventory scheduling, detailed maintenance scheduling and detailed quality-test scheduling should be specified. For interactions with production the following three interactions shall be defined, as illustrated in Figure 3.
a) Interaction between detailed production scheduling and detailed inventory scheduling. This is defined as coordination of information, at the start or completion of production, of the quantity of materials that is consumed or produced during production and stored or moved by Inventory operations.EN 62264-3-2017 pdf download.

Share on Facebook

Post on X

Follow us

Save