EN 16034-2014 pdf download.Pedestrian doorsets, industrial, commercial, garage doors and openable windows – Product standard, performance characteristics – Fire resisting and/or smoke control characteristics.
purposes without the assembler having to involve again a notified body to undertake the determination of the product type of the essential characteristic(s) that were already tested, provided that:
— the assembler manufactures a product which uses the same combination of components (components with the same characteristics), and in the same way, as that for which the system house has obtained the determination of the product type report; if this report is based on a combination of components not representing the final product as to be placed on the market, and/or is not assembled in accordance with the system houses instruction for assembling the components, the assembler needs to submit his finished product to the determination of the product type;
— the system house has notified to the manufacturer the instructions for manufacturinglassembhrig the product and installation guidance:
— the assembler (manufacturer) assumes the responsibility for the correct assembly of the product in accordance with the instructions for manufacturing/assembling the product and installation guidance notified to him by the system house;
— the Instructions for manufacturing/assembling the product and installation guidance notified to the assembler (manufacturer) by the system house are an Integral part of the assembler’s Factory Production Control system and are referred to In the determination of the product type report:
— the assembler is able to provide documented evidence that the combination of components he is using, and his way of manufacturing, correspond to the one for which the system house has obtained the determination of the product type report (he needs to keep a copy of the system house’s determination of the product type report);
— regardless the possibility of referring, on the basis of the agreement signed with the system house, to the latter’s responsibility and liability under private law, the assembler remains responsible for the product being in compliance with the declared performances, including both the design and the manufacture of the product, which Is given when he affixes the regulatory marking on his product.
6.3 Factory production control (FPC)
6.3.1 General
The manufacturer shall establish, document and maintain an FPC system to ensure that the products placed on the market comply with the declared performance of the essential characteristics.
The FPC system shall consist of procedures, regular inspections and tests and/or assessments and the use of the results to control raw and other Incoming materials or components. equipment, the production process and the product.
All the elements, requirements and provisions adopted by the manufacturer shall be documented in a systematic manner in the form of written policies and procedures.
This factory production control system documentation shall ensure a common understanding of the evaluation of the constancy of performance and enable the achievement of the required product performances and the effective operation of the production control system to be checked. Factory production control therefore brings together operational techniques and all measures allowing maintenance and control of the compliance of the product with the declared performances of the essential characteristics.
In case the manufacturer has used shared or cascading product type results, the FPC shall also include the appropriate documentation as foreseen in 6.3.4 and 6.3.5.
6.3.2 Requirements
6.3.2.1 General
The manufacturer is responsible for organizing the effective implementation of the FPC system in line with the content of this product standard. Tasks and responsibilities in the production control organization shall be documented and this documentation shall be kept up-to-date.
The responsibility, authority and the relationship between personnel that manages. performs or verifies work affecting product constancy, shall be deflned This applies in particular to personnel that need to initiate actions preventing product non-constancies from occurring, actions in case of non-constancies and to identify and register product constancy problems.EN 16034-2014 pdf download.

Share on Facebook

Post on X

Follow us

Save