DD IEC PAS 61754-19:2001 pdf download Fibre optic connector interfaces — Part 19: Type SG connector family
Scope
This document defines the standard interface dimensions for the Type SG family ofconnectors.
2Description
The parent connector for the Type SG connector family is a single position plug of plug/socketconnector set configuration. The plug is characterized by duplex cantilevered optical fibreslocated within the plug interior. Plug optical fibres flex to mate with socket optical fibre endsMating Socket optica fibres are positioned and aligned by integral V-Grooves. Socket VGrooves capture, guide, and align the plug optical fibres during connector set engagement.The spring-release latch limits plug penetration into the socket, it is also a single position keypreventing inverted assembly. Contaminant entry is restricted by an integral plug cover ancsocket door. Each is normally closed when demated, but self-actuate to open position forsingle-action connector set engagement.
3Interfaces
The subsequent pages define the standard interfaces for the Type SG connector family. Thestandard interfaces contained in this document are listed in the following:
IEC 61754-19-1: Duplex Plug Connector lnterface – 8 degrees contact angleEC 61754-19-2: Duplex Socket Connector lnterface – 8 degrees contact angle
The following connectors are intermateable!
IEC61754-19-1mates with IEC 61754-19-2

Share on Facebook

Post on X

Follow us

Save