BS ISO 20711:2017 pdf download.Optics and photonics – Environmental requirements – Test requirements for telescopic systems.
This document specifies requirements to be met with regard to resistance of the optical, mechanical, chemical and electrical properties or performance data of instruments to environmental influences and hence determines geographical and technical areas of application. It applies to consumer telescopic systems and accessories, such as hunting and sporting products.
Environmental test methods as specified in relevant parts of Iso 9022 are assigned to the various areas of application for the purpose of ascertaining the suitability of the instruments in their respective area of application.
This document is the basis for the specification of environmental requirements and environmental tests in instrument standards. If necessary, these requirements and tests can be amended in the instrument standards.
This document does not deal with the requirements to be met by the packaging of the instrument during transport from the manufacturer to the user.
NOTE Nominal values of properties and performance characteristics as understood by this document are predetermined by specifications provided by the manufacturer, technical terms of delivery and instrument standards.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (Including any amendments) applies.
ISO 9022-1, Optics and photonics — Environmental test methods — Part 1: Definitions, extent of testing
ISO 9022-2, Optics and photonics — Environmental test methods — Part 2: Cold, heat and humidity
ISO 902 2-3, Optics and photonics — Environmental test methods — Part 3: Mechanical stress
ISO 902 2-4, Optics and photonics — Environmental test methods — Part 4: Salt mist
ISO 902 2-7, Optics and photonics — Environmental test methods — Part 7: Resistance to drip or rain
ISO 9022-8, Optics and photonics — Environmental test methods — Part 8: High internal pressure, low internal pressure, immersion
ISO 9022-9, Optics and photonics — Environmental test methods — Part 9: Solar radiation and weathering
ISO 9022-12, Optics and photonics — Environmental test methods — Part 12: Contamination
ISO 10109, Optics and photonics — Guidancelor the selection of environmental tests
ISO 14133-1, Optics and photonics — Specifications for binoculars, monoculars and spotting scopes — Part 1: General purpose instruments
ISO 14133•2, Optics and photonics — Specifications for binoculars, monoculars and spotting scopes — Part 2: High performance instruments.BS ISO 20711 pdf free download.
BS ISO 20711:2017 pdf download
PS:Thank you for your support!
