BS EN ISO 3949:2018 pdf download

08-30-2020 comment

BS EN ISO 3949:2018,Plastics hoses and hose assemblies – Textile-reinforced types for hydraulic applications – Specification.BS EN ISO 3949:2018 pdf free download.
BS EN ISO 3949:2018 specifies requirements for three types of textile-reinforced thermoplastics hose and hose assembly of nominal size from 3,2 to 25. Each type is divided into two classes dependent on electrical conductivity requirements.
This document does not include requirements for end fittings. It is limited to the performance of hoses and hose assemblies.
4 Classification
Three types of hose are specified, distinguished by their maximum working pressure:
a) Type R7: hoses with one or more layers of reinforcement;
b) Type R8: hoses with one or more layers of reinforcement, for operation at higher working pressures;
c) Type R18: hoses with one or more layers of reinforcement, 21,0 MPa (210 bar) working pressure based;
Each type of hose is divided into two classes according to its electrical properties;
1) Class 1, no electrical requirements;
2)Class 2, “non-conductive” (see 7.8).
5 Materials and construction
5.1 Hoses
Hoses shall consist of a seamless thermoplastic lining resistant to hydraulic fluids, with suitable textile yarn reinforcement and a thermoplastic cover resistant to hydraulic fluids, water and the weather.
For class 2 hoses, the cover shall not be perforated. The cover shall be orange (colour code RAL 2004).
5.2 Hose assemblies
Hose assemblies shall only be manufactured with those hose fittings whose functionality conforms to the requirements of 7.1, 7.4, 7.5 and, for class 2 only, 7.8.

                                           Related Information                                             Download
PS:Thank you for your support!
BS EN 12607-3-2000 pdf download BS Standards

BS EN 12607-3-2000 pdf download

BS EN 12607-3-2000 pdf download.Methods of test for petroleum and its products — BS 2000-460.3: Bitumen and bituminous binders — Determination of the resistance to hardening under the influence of heat and air — Part 3: RFT...
Read More
EN 12329-2000 pdf download BS Standards

EN 12329-2000 pdf download

BS EN 12329-2000 pdf download.Corrosion protection of metals — Electrodeposited coatings of zinc with supplementary treatment on iron or steel. This BS EN 12329 specifies requirements for electrodeposited coatings of zinc on iron or steel witt supplementary...
Read More
BS EN 1430-2000 pdf download BS Standards

BS EN 1430-2000 pdf download

BS EN 1430-2000 pdf download.Methods of test for petroleum and its products — BS 2000-292:Bitumen and bituminous binders — Determination of particle polarity of bitumen emulsions (Identical with IP 292-2000). This BS EN 1430 specifies a method...
Read More

LEAVE A REPLY

Anonymous netizen Fill in information