BS/EN 9300-011-2013 pdf download.Aerospace series LOTAR Long Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data Part 011: Reference process description Data preparation”.
This BS/EN 9300-011 provides a detailed description for the recommended data preparation process for archiving of 3D and PDM data, as overviewed in EN 9300-010,
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
EN 9300-003, Aerospace series — LOTAR — Long Term Archiving and Retrieval of dgitaI technical product documentation such as 3D, CAD and PDM data — Part 003: Fundamentals and concepts
EN 9300-007, Aerospace series — LOTAR — Long Term Archiving and Retrieval of digital technical product documentation such as 30, CAD and PDM data — Part 007: Terms and References 1
EN 9300-010, Aerospace series — LOTAR — Long Term Archiving and Retrieval of digital technical product documentation such as 3D. CAD and PDM data— Part 010: Oveiview Data Flow 1)
ISO 14721:2003, Space data and information transfer systems — Open archival information system — Reference model (OAISJ
3 Terms, definitions and abbreviations
For the purposes of this document, the terms, definitions and abbreviations given in EN 9300-007 apply.
4 Applicability
EN 9300-011 is applicable to new 3-D product data records and may be applicable to existing 3D product data records, on current and earlier products, produced using previous regulations, standards and procedures. The current version is focused on product data as defined in the domain specific parts.
The data to be archived will be prepared by the producer. This includes a defined data verification, performed by a Quality Agent tool. The data verification will test the data against defined data quality requirements, and will provide a result report. Data preparation also includes the creation of Validation properties. The sub process shall be certified.
Output data:
— Submission Information Package (SIP), reset archiving trigger information,
process control data.
— error fixing report.
6 Detailed process steps description
6.1 General
Input and output data described in this standard represent the minimal requirements for the fulfilment of the process steps. Additional data may be added, but shall match at a minimum the requirements for the information package (see EN 9300-003, Section 5.3.2.1 “Definition of the core model”).
6.2 Select data for archiving
The producer selects data for archiving during, for example, a domain depended release process (this is outside the scope of EN 9300). As an example, the selection can be performed at a product structure viewer of a CAD/PDM system. The process step represents the initial trigger for the archiving process.
The selected e.g. CAD or PDM information defines the Content Information (CI) of the future SIP.
The producer will trigger the process manually. The system tool quality agent” automatically creates
Validation properties from the data and checks if the data meets with the recommended data quality criteria.
It is recommended that the process step is synchronised with the producer’s own release process.
Input data:
– cI_
Output data:
— Cl.
6.4 Data verification
Whereas the purpose of validation is to ensure that the right information has been captured, the intention of verification is to ensure that the data is correctly represented. Verification rules shall ensure that a data representation meet the quality requirements within defined tolerances. Verification is successful if no verification rule is violated. The verification rules are domain specific and are defined within EN 9300 (for example, verification rules for CAD are described in the 100 series parts of EN 9300). Only verification rules belonging to the core models are part of EN 9300.
The down stream processes and the data outputs are determined by the result of the ‘data verification”.
Input data:
— Cl;
— data quality rules.
Output data:
— If data verification is successful:
Cl;
reference to Results report (the integration of this information into the Descriptive Information is optional);
Results report.
– If data verification fails:
— data preparation error report.
6.5 Automatic creation of Validation properties?
The producer has to decide if a manual or automatic creation of Validation properties is possible.BS/EN 9300-011-2013 pdf download.

Share on Facebook

Post on X

Follow us

Save