BS EN 650-2012 pdf download.Resilient floor coverings— Polyvinyl chloride floor coverings on jute backing or on polyester felt backing or on a polyester felt with a polyvinyl chloride backing— Specification.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are ndispensable for its apphcation. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
EN 424, Resilient floor coverings — Determination of the effect of simulated movement of a furniture leg
EN 425. Resilient and laminate floor coverings — Castor chair test
EN 426, Resilient floor coverings — Determination of width, length, straightness and flatness of sheet material
EN 427, Resilient floor coverings — Determination of the side length. squareness and straightness of tiles
EN 428, Resilient floor coverings — Determination of overall thickness
EN 429, Resilient floor coverings — Deterrninalion of the thickness of layers
EN 430, Resilient floor coverings — Determination of mass per unit area
EN 431, Resilient floor coverings — Determinat,on of peel resistance
EN 432, Resilient floor coverings — Determination of shear farce
EN 433. Resilient floor coverings — Determination of residual indentation after static loading
EN 434, Resilient floor coverings — Determination of dimensional stability and curling after exposure to heat
EN 436, Resilient floor coverings — Determination of density
EN 660-2, Resilient floor coverings — Determination of wear resistance — Part 2: Frick-Taber test
EN 661, Resilient floor coverings — Determination of the spreading of water
EN 663, Resilient floor coverings — Determination of conventional pattern depth
EN 684, Resilient floor coverings — Determination of seam strength
EN 685. Resilient, textile and laminate floor coverings — Classification
EN 718, Resilient floor coverings — Determination of mass per unit area of a reinforcement or a backing of polyvinyl chloride floor coverings
EN ISO 1 05-B02: 1999, Textiles — Tests for colour fastness — Part B02: Colour fastness to artificial light:
Xenon arc fading lamp test ISO 105-802:1994. including amendment 1:1998)
3.1
polyvinyl chloride floor covering on jute backing
floor covering consisting of a polyvinyl chloride surface layer applied to jute felt backing
3.2
polyvinyl chloride floor covering on polyester felt backing
floor covering consisting of a polyvinyl chloride surface layer applied to polyester felt backing
3.3
polyvinyl chloride floor covering on polyester felt with polyvinyl chloride backing
floor covering consisting of a polyvinyl chloride surface layer applied to polyester felt with a polyvinyl chloride backing
4 Requirements and testing
4.1 General requirements
Floor coverings described in this European Standard shall conform to the appropriate general requirements as
specified in Table 1 when tested in accordance with the methods given therein.
4.2 ClassIfication requirements
4.2.1 Wear group classification
Polyvinyl chloride floor coverings are classified in the appropriate wear group specified in EN 660-2.
Floor coverings described in this standard shall be classified in wear group T or P.
Floor coverings with a transparent wear layer are a priori group T and need not be tested
4.2.2 Wear layers
A homogeneous product shall retain its wear group classification throughout the thickness of the product if tested.
A wear layer shall retain its wear group classification throughout its thickness if tested.
4.2.3 Level of use classification
Floor coverings described in this European Standard shall be classified as suitable for different levels of use in accordance with the performance requirements specified in Table 3 and 4, when tested with the methods given therein, Classification shall conform to the scheme specified in EN 685.
5 Marking
Floor coverings covered by this standard and/or their packaging shall bear the following marking:
a) number and date of this European Standard, i.e. EN 650:2012;
b) manufacturers or supplier’s identification;
c) product name;
d) colour/pattern, and batch number and, if applicable, roll number;
e) classes/symbols appropriate for the product;
1) for rolls: the length. width and thickness:
g) for tiles: the dimensions of a tile and the area in square metres contained in a package.BS EN 650-2012 pdf download.
BS EN 650-2012 pdf download
PS:Thank you for your support!
