BS/EN 4611-005-2018 pdf download.Aerospace series – Cables, electrical, for general purpose, single and multicore assembly – XLETFE Family
Part 005: Silver plated copper – Operating temperatures between – 65 °C and 150 °C – Single extruded wall for enclosed applications – UV laser printable – Product standard.
This BS/EN 4611-005 specifies the characteristics of LJV laser printable, silver plated copper conductor electrical cables Crosslinked Ethylene Tetra Fluoro Ethylene co-polymer (XLETFE) family for use in the on-board electrical systems of aircraft operating at temperatures between —65 °C and 150 °C. The voltage rating is 600 V rms at sea level. This insulation system has been used in aerospace applications using 115 V ac (phase-to-neutral) 400 Hz and 28 V dc. Verification of the suitability of cables for use in other electrical systems is the responsibility of the user.
These cables are only suitable for airframe use with additional protection against mechanical abuse. In case of conflict between this standard and other referenced documents the requirements of this standard shall take precedence.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
EN 2084, Aerospace series — Cables, electric, single-core, general purpose, with conductors in copper or copper alloy — Technical specification
EN 2235, Aerospace series — Single and multicore electrical cables, screened and jacketed
EN 3475-100 (all parts), Aerospace series — Cables, electrical, aircraft use — Test methods — Part 100:
General
EN 4611-002, Aerospace series — Cables, electrical, for general purpose, single and multicore assembly — XLETFE Family — Part 002: General
EN 9133, Aerospace series — Quality Management Systems — Qualification Procedure for Aerospace — Standard Products
3 Terms, definitions, symbols and abbreviations
For the purposes of this document, the terms, definitions, symbols and abbreviations given in EN 3475-100 apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
• IEC Electropedia: available at http://www.electropedia.orJ
• ISO Online browsing platlorm: available at http://www.iso.orglobp
4.3 Number of cores
See EN 4611-002.
See EN 2235 for cabling
4.4 Coiourcodlngofcores
See EN 4611-002.
S Required characteristics
According to EN 4611-002. EN 2084 and EN 3475400.
See Table 3.
NOTE Tests EN 3475-302 to EN 3475-706 shall be p4smed on the single core cable.
8 Identification and marking
See EN 4611-002.
9 Packaging, labelling and delivery lengths
See EN 2084.
10 Technical specification
See EN 2084.
See EN 2235.BS/EN 4611-005-2018 pdf download.
BS/EN 4611-005-2018 pdf download
PS:Thank you for your support!
