BS/EN 16836-3-2016 pdf download.Communication systems for meters Wireless mesh networking for meter data exchange Part 3: Energy profile specification dedicated application layer.
This BS/EN 16836-3 specifies requirements for the dedicated application layer of a communication protocol for the exchange of data from metering devices to other devices within a mesh network. This standard makes reference to a number of documents whereby core requirements are specified. This referencing is in compliance with the Bridge Consortium and additionally the Memorandum of Understanding between the ZigBee Alliance and CEN/CENELEC.
The EN 16836 series represents a feature subset of a larger standard and as such not all of the features specified in the referenced documents are specified in this standard, due to some features being outside the scope of CEN/TC 294. Where this is the case the out of scope feature has either been omitted or specified as excluded.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
EN 16836-1:20 16. Communication systems for meters and remote reading of meters — Wireless mesh networking for meter data exchange — Part 1: Introduction and standardization framework
ZigBee Cluster Library — 07-5123 Rev 04, April 26, 2010
ZigBee Smart Energy Standard 07-5356 Rev 19, December 3, 2014
OTA Cluster Specification 09-5264 Rev 23, March 12, 2014
NOTE The above ZigBee documents and OTA Cluster Specification can be obtained from can be obtained from www,zithee.or/about/centc294.
3 Terms and definitions
For the purposes of this document, the terms, definitions, acronyms and abbreviations given in
— ZigRee Cluster Library — 07-5123 Rev 04,
— ZigBee Smart Energy Standard 07-5356 Rev 19, and
— OTA Cluster Specification 09-5264 Rev 23
apply.
4 Requirements
4.1 General
The dedicated application layer shall be defined in this standard using the references specified in Tables 1 and 2.
This energy profile shall conform to the general framework given in EN 16836-1:2016, the network layer given in EN 16836-1:2016, and the requirements given in 4.2, 4.3, 4.4.
4.2 Cluster library
The requirements given in Table 1 are the basic requirements for this part of EN 16836 and are detailed in the ZigBee Cluster Library – 07-5 123 Rev 04.BS/EN 16836-3-2016 pdf download.
BS/EN 16836-3-2016 pdf download
PS:Thank you for your support!
