ASME NUM-1:2004 pdf download

12-18-2022 comment

ASME NUM-1:2004 pdf download Rules for Construction of Cranes, Monorails, and Hoists (With Bridge or Trolley or Hoist of the Underhung Type)
NUM-G-2100 GENERAL
The owner shall specifyenvironmental conditionsfor operation and storage.This equipment shall bedesigned to withstand the effects of the conditionsspecified herein. Where the ability of the equipmentto withstand the effects is unknown. or limited, themanufacturer shall specify such limitations and theirbasis,for acceptance by the owner,prior to order.
NUM-G-2200 RADIATION
(a) The owner shall specify the accumulated radiationdosage expected to be seen by the crane, hoist, ormonorail. over the life of the nuclear facility.
(b) Components whose normal life could be reducedby the effects of the specified radiation shall be tabulatedand submitted to the owner.
(c) Components of equipment whose failure due tospecified radiation could result in loss of load shalleither be designed to withstand the specified radiationor shall have a specific replacement period. Wherestate of the art is such that sufficient data is notavailable,periodic inspections shall be made by theowner to determine when replacement should be madeThe inspection requirements and their bases are to bespecified by the manufacturer and provided to theowner.
NUM-G-2300 TEMPERATURE
(a) The owner shall specify the following temperaturerequirements in the area where the crane. hoist, ormonorail operates:
(1) maximum operating temperature:
(2) minimum operating temperature;
(3) ambient temperature for motors;
(4) maximum construction temperature: and
(5) minimum construction temperature.(b) The crane,hoist. or monorail shall be designedto withstand the effects of the specified temperatures.or the limitation of the equipment’s design concerningthese temperature conditions shall be specified by the manufacturer.The inspection requirements and theirbases are to be specified by the manufacturer andprovided to the owner.
NUM-G-2400 PRESSURE
(a) The owner shall specify the following pressurerequirements in the area where the crane, hoist, ormonorail operates:
(1) normal operating pressure; and
(2) any test or abnormal event pressures includingthe rate of change of pressures.
(b) The crane, hoist, or monorail shall be designedto withstand the effects of the specified pressures, orthe limitations of the equipment’s design concerningthese pressure conditions shall be specified by themanufacturer. Specifically where there are changes inpressureenclosures shall be vented.The inspectionrequirements and their bases are to be specified by themanufacturer and provided to the owner.
NUM-G-2500 HUMIDITY
(a) The owner shall specify the humidity conditionsin the area where the crane, hoist, or monorail operates(b) Either the crane. hoist, or monorail shall bedesigned to withstand the effects of the specified humid-ity, or the limitations of the equipment’s design concern-ing the humidity condition shall be specified by themanufacturer.The inspection requirements and theirbases are to be specified by the manufacturer andprovided to the owner

                                           Related Information                                             Download
PS:Thank you for your support!
ASME B107.100:2002 pdf download ASME Standards

ASME B107.100:2002 pdf download

ASME B107.100:2002 pdf download WKENGHLD INCORPORATING ASME B107.6, ASME B107.9, ASME B107.39, and ASME B107.40 4.5 Proof Torque When tested as specified, wrenches shall withstand the proof torque specified in the applicable tables without failure or permanent...
Read More
ASME BPE:2002 pdf download ASME Standards

ASME BPE:2002 pdf download

ASME BPE:2002 pdf download BIOPROCESSING EOUIPMENT GR-1 INTRODUCTION This Standard provides the requirements applicableto the design of bioprocessing equipment inciudingaspects related to sterilily and cleanability,dimensionsand tolcranccs, surfacc finish, material joining, andscals. Thcsc apply to: (a) componcnts that...
Read More
ASME N509:2002 pdf download ASME Standards

ASME N509:2002 pdf download

ASME N509:2002 pdf download NUCLEAR POWER PLANT UNITS AID CDMPONENTS 1 SCOPE This Standard covers requirements for the designconstruction, and qualification and acceptance testingof the air-cleaning units and components which makeup Engineered Safety Feature (ESF) and other...
Read More

LEAVE A REPLY

Anonymous netizen Fill in information