ASME B18.24.2:1998 pdf download

12-14-2022 comment

ASME B18.24.2:1998 pdf download PART lDENTIFYING NUMBER (PIN) CODE SYSTEM STANDARD FOR B18 INTERNALLY THREADED PRODUCTS
1 INTRODUCTORY NOTES
1.1 Scope
1.1.1 This Standard is intended to provide all users(manufacturers,distributors,design and conhiguration.parts control.inventory control,and test and maintenance functions) with the capability to identify internallythreaded fastener products by a preselected order olcoding as specifed in this Standard.
1.1.2 The B18 PIN coverage is a self-containedcodc with distinct identification linkage to individualASME B18 internally threaded fastener product standards. The PIN code concept provides for direct traceability to the applicable B18 product standard
2 GENERAL GUIDANCE
2.1 Optional Coverage
Each individual ASME BI8 internally threaded fas-tener product standard provides for optional B18 PINcoverage under“Designation””or”Ordering” data.
2.2 Alpha“1”and“O”
Alpha “I” and “O” are not used in PIN feld codeconfiguration.
2.3 Characteristics
The B18 PIN Code shall identify only those characteristics specified in the B18 product standards
3 PIN OADER OF CODING BY FIELDS
3.1 Field 1 _ Fastener Family for ExternallyThreaded Product
One alpha character.
3.2 Field 2 – B18 Standard Identification
Four numeric characters or with the fourth characteras“N” representing the last three or four numbercharacters of B18 Standard designation after “B18”asapplicable. The“N”represents a no-entry condition.
NOTE: If after the B18 Standard number designarion there is anumber of digits less thun three, one or two zeros arc added tomakc up thc four-churacler designation. For examplc: B18.2.2220N,0r B18.2.4.2M242N,or B18.16.M =16IN,
3.3 Field 3 – Fastener TypeTwo numeric characters. See Matrix A.
3.5 Field 5 – Diameter (for Nuts or Inserts)and Length (for Inserts)
Four alpha and numneric characters (total of fourcharacters). See Matrices B1 through B3.“NN” repre-sents a no-entry condition.
3.6 Field 6 – Materia and Treatment
Five alpha and/or numeric characters. See Matrix C.This field covers both direct American Society forTesting and Materials (ASTM) source reference andAluminum Association (AA) Copper Development As-sociation (CDA),Iron and Steel Society (ISS),andSociety of Automotive Engineers (SAE) as identifiedin SAE HS-1086/ASTM DS-56 Metals and Alloys inthe Unified Numbering System (UNS) by UNS designa-tion and Industrial Fasteners Institute (IFI) source reference accordingly.“N””NN” or“NNN” is identificdas a no-entry condition.
Copper Development Association (CDA),260 MadisonAvenue、New York,NY10016Industrial Fasteners Institute (IFI), 1717 East 9th Street,Cleveland,0H 44114Iron and Steel Society (ISS), 186 Thorhill Road.Warrendale,PA15086Society of Automotive Engineers (SAE), 400 Common-wealth Drive,Warrendale,PA 15086
3.7 Field 7 一 Plating, Coating, andPassivation
Two alpha characters. See Matrix D.
3.8 Field 8一 Special FeaturesOne alpha or numeric character

                                           Related Information                                             Download
PS:Thank you for your support!
ASME B107.100:2002 pdf download ASME Standards

ASME B107.100:2002 pdf download

ASME B107.100:2002 pdf download WKENGHLD INCORPORATING ASME B107.6, ASME B107.9, ASME B107.39, and ASME B107.40 4.5 Proof Torque When tested as specified, wrenches shall withstand the proof torque specified in the applicable tables without failure or permanent...
Read More
ASME BPE:2002 pdf download ASME Standards

ASME BPE:2002 pdf download

ASME BPE:2002 pdf download BIOPROCESSING EOUIPMENT GR-1 INTRODUCTION This Standard provides the requirements applicableto the design of bioprocessing equipment inciudingaspects related to sterilily and cleanability,dimensionsand tolcranccs, surfacc finish, material joining, andscals. Thcsc apply to: (a) componcnts that...
Read More
ASME N509:2002 pdf download ASME Standards

ASME N509:2002 pdf download

ASME N509:2002 pdf download NUCLEAR POWER PLANT UNITS AID CDMPONENTS 1 SCOPE This Standard covers requirements for the designconstruction, and qualification and acceptance testingof the air-cleaning units and components which makeup Engineered Safety Feature (ESF) and other...
Read More

LEAVE A REPLY

Anonymous netizen Fill in information