ASME B107.50M:1998 pdf download

12-13-2022 comment

ASME B107.50M:1998 pdf download BRICK CHISELS AND BRICK 8ETS: SAFETY REOUREMENTS
1 GENERAL
1.1 Scope
This Standard provides safety requirements for thedesign, construction testing, and use of brick chiselsand brick sets that are intended specifically for use inscoring and cutting brick and masonry block.
1.2 Purpose
This Standard is intended to serve as a guide inselecting,testing,and using the hand tools covered.Details of design, testing. and use of the tools coveredare specified only as they relate to safety. It is not thepurpose of this Standard to specify the details ofmanufacturing.
This Standard is also meant to serve as a guide indeveloping manuals and posters and for training personnel in safe practices.
1.3 Application
This Standard may be used as a guide by stateauthorities or other regulatory bodies in the formulationof laws or regulations. It is also intended for voluntaryuse by establishments that use or manufacture the toolscovered.
The methods employed to ensure compliance with thisStandard shall be determined by the propcr rcgulatory oradministrative authonity.
1.4 Shall and Should
Mandatory requirements of this Standard are charac-terized by the word shall. If a provision is of anadvisory natureit is indicated by the word should oris stated as a recommendation.
1.5 Equivalent
The word equivalent in the Standard shall be interpre-ted to mean alternative designs or features that willprovide an equal degree of safety.
2 NORMATIVE REFERENCES
The following documnents form a part of this Standardto the extent specified herein. At the time of publication.the editions indicated were valid. All standards aresubject to revision, and parties to agreements based onthis Standard are encouraged to investigate the possibility of applying the most recent editions of the standardsindicated below
ANSIZ87.1-1989,Practice for Occupational and Educa-tional Eye and Face Protection; Supplement ANSIZ87.1a-1991
ANSI Z535.4-1991,Product Safety Signs and Labels
Publisher: American National Standards Institutc,1lWest 42nd Street, New York,NY 10036
ASTM A29/A29M-93a,Standard Specification forSteel Bars,Carbon and Alloy, Hot-Wrought andCold-Finished,General Requirernents forASTM A 322-91,Standard Specification for Steel BarsAlloy,Standard GradesASTM A 331-95,Standard Specification for Steel Bars,Alloy,Cold-FinishedASTM A S76-90b (Reapproved 1995),Standard Speci-fication for Steel Bars, Carbon, Hot-Wrought, SpecialQualityASTM A 681-94,Standard Specification for ToolSteels AlloyASTM E18-94,Standard Test Methods for RockwellHardness and Rockwell Superficial Hardness of Metallic Matcrials
Publisher: American Society for Testing and Materials100 Bart HarborDrive,West Conshohocken,PA19428

                                           Related Information                                             Download
PS:Thank you for your support!
ASME B107.100:2002 pdf download ASME Standards

ASME B107.100:2002 pdf download

ASME B107.100:2002 pdf download WKENGHLD INCORPORATING ASME B107.6, ASME B107.9, ASME B107.39, and ASME B107.40 4.5 Proof Torque When tested as specified, wrenches shall withstand the proof torque specified in the applicable tables without failure or permanent...
Read More
ASME BPE:2002 pdf download ASME Standards

ASME BPE:2002 pdf download

ASME BPE:2002 pdf download BIOPROCESSING EOUIPMENT GR-1 INTRODUCTION This Standard provides the requirements applicableto the design of bioprocessing equipment inciudingaspects related to sterilily and cleanability,dimensionsand tolcranccs, surfacc finish, material joining, andscals. Thcsc apply to: (a) componcnts that...
Read More
ASME N509:2002 pdf download ASME Standards

ASME N509:2002 pdf download

ASME N509:2002 pdf download NUCLEAR POWER PLANT UNITS AID CDMPONENTS 1 SCOPE This Standard covers requirements for the designconstruction, and qualification and acceptance testingof the air-cleaning units and components which makeup Engineered Safety Feature (ESF) and other...
Read More

LEAVE A REPLY

Anonymous netizen Fill in information