ASME B107.11:2002 pdf download PLIERS: DIAGONAL IUTTINI AND END CUTTINE
SCOPE
This standard covers the dimensional and functionalcharacteristics of pliers suitable for cutting wire. Pliersshall have cutting edges diagonal to or at right anglesto their longitudinal axis.Inclusion of dimensional data in this standard is notintended to imply that all of the pliers described hereinare stock production sizes. Consumers should consultwith manufacturers concerning lists of stock production sizes.
2CLASSIFICATION
Type I: Diagonal cutting, regular noseClass 1: Plain
Style A: Standard cutting edgesStyle B: Semi-flush cutting edges
Style C: Flush cutting edgesClass 2: With stripping notches and skinning hole
Style A: Standard cutting edges
Style B: Semi-flush cutting edges
Class 3: With cushion grip throat
Style A: Standard cutting edges
Style B: Semi-flush cutting edgesType Il: Regular nose, compound action
Style A: Standard cutting edges
Style B: Semi-flush cutting edges
Style C: Flush cutting edgesType IIl: Diagonal cutting, heavy duty, high leverage
Style A: Standard cutting edgesStyle B: Semi-flush cutting edges
Style C: Flush cutting edges
Type IV: End cuttingStyle A: Standard cutting edgesStyle B: Semi-flush cutting edgesStyle C: Flush cutting edges
3 NORMATIVE REFERENCES
The following standards form a part of this Standardto the extent specified herein. At the time of publicationthe editions indicated were valid. All standards are subject to revision, and parties to agreements based on thisStandard are encouraged to investigate the possibilityof applying the most recent editions of the standardsindicated below.
ASME B46.1-1995, Surface Texture (Surface Roughness,Waviness, and Lay)ASME B107.25M-1996,Pliers — Performance TestMethodsPublisher: The American Society of Mechanical Engineers(ASME International),Three Park Avenue, NewYork,NY 10016-5990
DEFINITIONS
Definitions of terms used within this Standard maybe found in ASME B107.25M
5 REQUIREMENTS
5.1 Illustrations
The illustrations shown herein are descriptive andnot restrictive, and are not intended to preclude themanufacture of pliers that are otherwise in accordancewith this Standard. All figures are shown without comfort grips.
5.2 Materials
The materials used in the manufacture of pliers shallbe such as to produce pliers conforming to the requirements specified herein.
5.3 Design
Pliers shall be similar to the figure to which referenceis made; shall be proportioned in all parts so as to bestrong, durable, and easy to operate; and shall conformto the requirements specified herein. Test specimensshall withstand applicable test procedures withoutcracking or breaking
5.4 Severed Wire Profiles
Cutting edges shall be so designed as to produce oneof the severed wire profiles illustrated in Table 1 usingwire specified in para. 6.2.1.
ASME B107.11:2002 pdf download
PS:Thank you for your support!
