ASME A112.19.1M:1999 pdf download Enameled Cast lron Plumbing Fixtures
A1 SCOPE
This Appendix covers requirements of the FederalGovernment for the procurement of enameled cast ironplumbing fixtures.
A2 APPLICABLE DOCUMENTS
The following document, of the issues in effect on dateof invitation for bids or request for proposal, forms a partof this Appendix to the extent specified herein.
ANSI/ASQC Z1.4′ — Sampling Procedures and Tablesfor Inspection by Attributes
A3 REQUIREMENTS
A3.1 Part or identifying Number (PIN)
The plumbing fixtures covered byASMEA112.19.1M-1994 shall be identified by a PIN. This partnumber is intended for cataloging and ordering purposes(see para. A6) and not for surface marking on the productThe PIN shall be written as shown:
A3.1.1 Part Numbers for Bathtub (FixtureDesignation = 1)
(a) First character denotes type
A = Corner bathtub with straight front
B = Corner bathtub with extended front
C = Recess bathtub with straight front
D = Recess bathtub with extended front
E = Drop-in or Island type (with tiling flange)F= Drop-in or Island type (without tiling flange)
(b) Second character denotes location of overflow anddrain outlet.I = Left hand
2 = Right hand
(c) Third character denotes nominal size (inches).
ASME A112.19.1M:1999 pdf download
PS:Thank you for your support!