ANSI SCTE 02 2006 pdf download Specification for “F” Port, Female, Indoor
1.0 SCOPE The purpose of this document is to specify requirements for female indoor “F” ports that are used in the 75 ohm RF broadband communications industry. This specification applies to SCTE drop cable specifications ANSI/SCTE 74 2003, ANSI/SCTE 71 2003, ANSI/SCTE 100 2004, IPS SP 005 and IPS SP 006.
2.0 DEFINITIONS AND ACRONYMS
2.1 Dielectric: The material that is used to insulate the center conductor from contacting the outer housing.
2.2 Thread Relief: A reduced diameter section of the threaded surface to allow the tool to run out. 2.3 Center Conductor: The inner conductor of a coaxial cable or pin of mating male connector.
2.4 Mating Male Center Conductor Clearance: The distance from the reference plane of the female “F” port to which the center conductor of the mating male connector may penetrate without damaging the port or encountering a blockage.
2.5 Positive Contact Point: The distance from the reference plane of the female “F” port to the first point of contact in the female center contact when the installed mating center conductor is centered.
2.6 Reference Plane: The reference plane on the female indoor “F” port is the mating surface that seats against the male “F” port. It is also the plane from where all horizontal dimensions are taken.
2.7 Parting Line (relevant to casting process only): A raised mark left on the surface of a part as a result of the gap between two halves of a die.
3.0 NORMATIVE REFERENCES The following documents contain provisions, which, through reference in this text, constitute provisions of this standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreement based on this standard are encouraged to investigate the possibility of applying the most recent editions of the documents listed below.
3.1 SCTE References ANSI/SCTE 74 2003 (formerly IPS SP 001), Specification for Braided 75 Ohm Flexible RF Coaxial Drop Cable
ANSI SCTE 02 2006 pdf download
PS:Thank you for your support!
