AIA/NAS 954-2013 pdf download NUMERICALLY CONTROLLED HORIZONTAL BORING, DRILLING AND MILLING MACHINE
SCOPE
Purpose
This specification provides a standard for the manufacture, performance, reliability, inspection, and procurement ofnumerically controlled horizontal boring. driling, and milling machine(s). This standard lists minimum requirementsand is not to limit design advances.
Classification
The machine(s) shall be of the following types, sizes, and classes
Type
The machine(s) shall be of the horizontal spindle, table type, numerically controlled, high speed, low speed
Size
Small; Large
Class
Numerically controlled positioning and straight cut AlA class 1ll, contouring AlA class IV, and contouring/positioningAIA cass IlI/IV.
Intended Use
The machine(s) described by this specification are intended for boring, drilling, and milling structures and fittingsused in aircraft and missile construction. The relationship of horsepower, feeds, and speeds was established for bestperformance in aluminum and magnesium (high speed machine) and also for titanium and steel alloys (low speedmachine).
APPLICABLE DOCUMENTS
The latest revision of the following specifications, codes, and standards are included as a portion of thisSpecification. Detail requirements listed in this specification shall override any contradictory portions of the followingspecifications, codes, and standards.
State and Local Safety and Electrical Codes (3.5, 3.8)
Government Standards29 CFR 1910 Occupational Safety and Health Standards (OSHA Act 1970) (3.8)
lllinois Institute of Technology Research InstituteiIlinois Institute of Technology Research Institute (llTRl) Standard for APT Programming Language
ASMEInternationalASME B5.1MT-Slots, Their Bolts,Nuts,and Tongues (3.4.1)
ASME B5.18Spindle Noses and Tool Shanks for Milling Machines (3.3.1.1)
ASME BPVCBoiler and Pressure Vessel Code. Section VIll (3.10)
TechAmericaEIA-RS-244-BCharacter Code for Numerical Machine Control Perforated TapeEIA-RS-281-BElectrical and Construction Standards for Numerical Machine ControlEIA-358-CAmerican National Standard Code for lnformation lnterchange for Numerical Machine ControlEIA-408Interface between Numerical Control Equipment and Data Terminal Equipment Employing ParalleBinary Data Interchange
Copies can be obtained from TechAmerica, 601 Pennsylvania Avenue NW, North Building, Suite 600, WashingtonDC,20004, www.techamerica.org
Telecommunications Industry AssociationTIA-232-FInterface between Data Terminal Equipment and Data Circuit-Terminating Equipment EmployingSerial Binary Data Interchange
Copies can be obtained from TIA, 2500 Wilson Boulevard, Suite 300, Arlington, VA 22201, www.tiaonline.ora
Aerospace Industries AssociationNAS938NAS953NAS955
Machine Axis and Motion NomenclatureNumerical Control Svstem (Reference Only)
Interchangeable Tape Standards – Variable Block Format, Contouring and Contouring/Positioning
Numerically Controlled Equipment (3.3.24)
NAS972NAS979NAS985NAS993NAS995
Glossary of Manufacturing Equipment Terms (8.1)
Uniform Cutting Tests – NAS Series Metal Cutting Equipment Specifications (4.3.3.1)Uniform Alignment Tests NAS900 Series Equipment Specifications (4.3.2.1)Direct Numerical Control System (DNC) (3.3.2)Computerized Numerical Control (CNC) System for Numerically Controlled Machine Tools (3.3.2)
Copies can be obtained from AlA, 1000 Wilson Boulevard, Suite 1700, Arlington, VA 22209, www.aia-aerospace.org
B11 Standards,Inc.ANSI B11.TR5-2006Sound Level Measurement Guidelines (3.13.3)
Copies can be obtained from B11 Standards, PO Box 690905, Houston, TX, www.b11standards.com.
National Fire Protection AssociationNFPA 70National Electrical Code (3.5)NFPA 79Electrical Standard for Industrial Machinery (3.5, 3.5.9, 3.3.2.22)
Copies can be obtained from NFPA, 1 Batterymarch Park, Quincy, MA 02169, www.nfpa.orq
AIA/NAS 954-2013 pdf download
PS:Thank you for your support!
