AIA/NAS 9310-2012 pdf download RIVET, BLIND, PROTRUDING HEAD, MECHANICALLY LOCKED SPINDLE, BULBED, STYLE B, CLASS 1, CODE M & C
CODES:
RIVET MATERIAL AND FINISH CODES:
ADD LETTER “M” AFTER BASIC PART NUMBER TO INDICATE NICKEL-COPPER ALLOY SLEEVE AND CRES SPINDLE.
ADD LETTER “L” AFTER RIVET CODE LETTER “M” TO INDICATE IVD ALUMINUM COATING PER MIL-DTL-83488 ON THE SLEEVE.
ADD LETTER “N” AFTER RIVET CODE LETTER “M” TO INDICATE EPOXY SPRAY ALUMINUM COATING PER NAS4006 ON THE SLEEVE.
NAS9310 ML−4−03
GRIP LENGTH DASH NUMBER FROM TABLE III
DIAMETER DASH NUMBER FROM TABLE I
MATERIAL AND FINISH CODE FROM CODES SECTION AND TABLE II
BASIC NUMBER
XAMPLES OF PART NUMBERS:
NAS9310M-4-03 = BLIND RIVET, OVERSIZE SHANK DIAMETER, PROTRUDING HEAD, NICKEL- COPPER ALLOY SLEEVE, CRES SPINDLE, .125 NOM RIVET DIAMETER, .126 TO .187 GRIP RANGE.
NAS9310ML-5-05 = BLIND RIVET, OVERSIZE SHANK DIAMETER, PROTRUDING HEAD, NICKEL- COPPER ALLOY SLEEVE, CRES SPINDLE, .156 NOM RIVET DIAMETER, .251 TO .312 GRIP RANGE, SLEEVE IVD ALUMINUM COATED PER MIL-DTL-83488.
NAS9310MN-5-05 = BLIND RIVET, OVERSIZE SHANK DIAMETER, PROTRUDING HEAD, NICKEL- COPPER ALLOY SLEEVE, CRES SPINDLE, .156 NOM RIVET DIAMETER, .251 TO .312 GRIP RANGE, SLEEVE EPOXY SPRAY ALUMINUM COATED PER NAS4006.
NAS9310C-5-05 = BLIND RIVET, OVERSIZE SHANK DIAMETER, PROTRUDING HEAD, NICKEL ALLOY 600 SLEEVE, NICKEL ALLOY X-750 SPINDLE, .156 NOM RIVET DIAMETER, .251 TO .312 GRIP RANGE.
NOTES:
(1) DIMENSIONS IN INCHES AND APPLY AFTER FINISH AND PRIOR TO THE APPLICATION OF LUBRICATION UNLESS OTHERWISE SPECIFIED.
(2) THIS STANDARD TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN.
(3) UNLESS OTHERWISE SPECIFIED, PART INVENTORY MANUFACTURED TO PREVIOUS REVISIONS OF THE APPLICABLE DRAWING OR SPECIFICATION MAY BE PROCURED AND USED UNTIL STOCK IS DEPLETED.
(4) REFERENCED DOCUMENTS SHALL BE THE ISSUE IN EFFECT ON DATE OF INVITATIONS FOR BID.
(5) DIMENSIONING AND TOLERANCING PER ANSI Y14.5M-1982.
/6/ END OF SPINDLE MAY BE FLAT, SLIGHTLY CONCAVE OR CONVEX.
/7/ OPTIONAL MATERIALS AS ALLOWED BY THIS NAS PART STANDARD MAY REQUIRE QUALIFICATION BY THE QUALIFYING ACTIVITY.
/8/ LUBE IN ACCORDANCE WITH NAS1687.
/9/ RIVETS COVERED BY THIS STANDARD MAY HAVE EITHER A SHEAR RING (INTEGRAL WITH SPINDLE AND SAME MATERIAL AS SPINDLE) OR A GRIP ADJUSTER (SEPARATE COMPONENT OF MATERIAL SHOWN IN TABLE II).
/10/ DO NOT USE “4-01” BELOW .025 GRIP, “5-01” BELOW .031 GRIP, OR “6-01” BELOW .037 GRIP.
/11/ DRIVING ANVIL – SILVER COLOR TO IDENTIFY STYLE “B” (OVERSIZE DIAMETERS).
/12/ SPINDLE CONFIGURATION – PULLING SERRATION DIMENSIONS SHALL BE PER NAS9315.
/13/ “ØJ” NOT TO EXCEED RIVET DIAMETER.
/14/ CODE “MP” IS INACTIVE FOR DESIGN AFTER JUNE 30, 2000 AND SUPERSEDED BY “ML” AND “MN” AT OPTION OF THE PROCURING ACTIVITY. CODE “MP” ALLOWED ALUMINUM IVD (MIL-DTL-83488) OR EPOXY SPRAY ALUMINUM COATING (NAS4006) AT MANUFACTURER’S OPTION.

Share on Facebook

Post on X

Follow us

Save