AIA/NAS 607-2010 pdf download PIN, STRAIGHT, HEADLESS, DOWEL
MATERIAL:
CARBON OR ALLOY STEEL IN ACCORDANCE WITH ASTM A 29/A 29M. THE MAXIMUM SULFUR AND PHOSPHORUS CONTENT SHALL NOT EXCEED .05 AND .04 PERCENT RESPECTIVELY. SURFACE AND CORE HARDNESS, 50 TO 64 HRC.
FINISH:
UNPLATED, COAT WITH COMPOUND IN ACCORDANCE WITH MIL-PRF-1 61 73, CLASS OPTIONAL,GRADE 2 OR 3.
CADMIUM PLATE IN ACCORDANCE WITH AMS-QQ-P-41 6, TYPE II, CLASS 2.
ZINC-NICKEL PLATE IN ACCORDANCE WITH AMS2417, TYPE 2.
CODE:
FIRST DASH NUMBER DESIGNATES NOMINAL DIAMETER IN .625 INCREMENTSSECOND DASH NUMBER DESIGNATES LENGTH IN .125 INCREMENTS.ADDITIONAL .125 LENGTHS, NOT TABULATED. MAY BE DESIGNATED BY CHANGING SECOND DASHNUMBER AS REQUIRED.INTERMEDIATE LENGTHS (.0625 INCREMENTS) MAY BE DESIGNATED BY ADDING “-5” TO SECONDDASH NUMBER.ADD“N”TO END OF PART NUMBER FOR ZINC-NICKEL PLATED PIN.ADD“P” TO END OF PART NUMBER FOR CADMIUM PLATED PIN.
EXAMPLE OF PART NUMBER:
NAS607-2-3- PIN,STRAIGHT.HEADLESSDOWEL..125 DIAMETER.375 LONGUNPLATED.NAS607-3-8N= PIN,STRAIGHT,HEADLESS,DOWEL,.188 DIAMETER,1.000 LONG,ZINC-NICKELPLATED.NAS607-3-9P- PIN,STRAIGHT,HEADLESS,DOWEL,.188 DIAMETER,1.125 LONG,CADMIUMPLATED.NAS607-3-4-5P = PINSTRAIGHT HEADLESS,DOWEL.188 DIAMETER,562 LONGCADMIUMPLATED
NOTES:
UNLESS OTHERWISE SPECIFIED, SURFACE ROUGHNESS 125 MICROINCHES Ra PER ASME B46.1.
DIMENSIONS IN INCHES AND APPLY AFTER FINISH UNLESS OTHERWISE SPECIFIED.
THIS STANDARD TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN.
REMOVE ALL BURRS AND SHARP EDGES
5REFERENCED DOCUMENTS SHALL BE THE ISSUE IN EFFECT ON DATE OF INVITATIONS FOR BID
UNLESS OTHERWISE SPECIFIED, PART INVENTORY MANUFACTURED TO PREVIOUS REVISIONS OFTHE APPLICABLE DRAWING OR SPECIFICATION MAY BE PROCURED AND USED UNTIL STOCK ISDEPLETED.
DIMENSIONING AND TOLERANCING PER ANSI Y14.5M-1982.

Share on Facebook

Post on X

Follow us

Save