AIA/NAS 592-2012 pdf download RING, RIGID TUBE CONNECTOR, ALUMINUM
MATERIAL:
ALUMINUM ALLOY, SEE PROCUREMENT SPECIFICATION NAS597.
FINISH:
SEE PROCUREMENT SPECIFICATION NAS597.
EXAMPLES OF PART NUMBER:
NAS592-16 = ALUMINUM RING FOR 1 INCH TUBE /12/
NAS592-16E = ALUMINUM RING FOR 1 INCH TUBE
NOTES:
(1) REMOVE ALL BURRS AND SHARP EDGES.
(2) DIMENSIONS IN INCHES AND APPLY AFTER FINISH UNLESS OTHERWISE SPECIFIED.
(3) TOLERANCES UNLESS OTHERWISE SPECIFIED: ANGLES ± 0°30′.
/4/ SURFACE MAKING CONTACT WITH TUBING FLARE SHALL BE FREE FROM BURRS, LONGITUDINAL FLATS,LONGITUDINAL AND SPIRAL TOOL MARKS,
(5) SURFACE ROUGHNESS: MACHINED SURFACE EXCEPT FLARE CONTACT AREA OF RING,125 MICROINCHES Ra PER ASME B46.1. SURFACE ROUGHNESS SYMBOLS SHALL BE IN ACCORDANCE WITH ASME Y14.36.
/6/ TOLERANCE: +.005, −.000.
(7) ENGINEERING INFORMATION: TO BE USED WITH TUBING FLARE THICKNESSES OF .010 TO .065.
(8) THIS STANDARD TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN.
(9) UNLESS OTHERWISE SPECIFIED, PART INVENTORY MANUFACTURED TO PREVIOUS REVISIONS OF THE APPLICABLE DRAWING OR SPECIFICATION MAY BE PROCURED AND USED UNTIL STOCK IS DEPLETED.
(10) UNLESS OTHERWISE SPECIFIED HEREIN, REFERENCED DOCUMENTS SHALL BE THE ISSUE IN EFFECT ON DATE OF MANUFACTURE. HOWEVER, EXISTING MATERIAL INVENTORY CERTIFIED TO A PREVIOUS REVISION OF THE APPLICABLE MATERIAL SPECIFICATION(S) IS ACCEPTABLE FOR USE UNTIL DEPLETION.
(11) DIMENSIONING AND TOLERANCING PER ANSI Y14.5M-1982.
/12/ NAS592-( ) INACTIVE FOR NEW DESIGN. FOR DESCRIPTION OF STATUS NOTES, SEE NAS380.

Share on Facebook

Post on X

Follow us

Save