AIA/NAS 1795-2012 pdf download RETAINING CLIP, REPLACEABLE NUT PLATE
FINISH:
PASSIVATE PER AMS2700 METHOD 1, TYPE 6 OR 7, CLASS 1.
DIMENSIONS IN INCHES AND APPLY AFTER FINISH UNLESS OTHERWISE SPECIFIED.ALL DIMENSIONSARE TYPICAL ABOUT THE CENTERLINE OF THE PART.
“A” MAY EXCEED PLUS TOLERANCE BY .010,PROVIDING CLIP MEETS ALL DIMENSIONS WHEN HELDCOMPRESSED TO“A”01
R”OPTIONAL FOR”-3”AND”-4”IN LIEU OFR”AND”E”
DASH NUMBER DESIGNATES THE THREAD SIZE OF THE CORRESPONDING PLATE NUT ELEMENTS IN16THS OF AN INCHEXCEPT “-3”MAY BE USED WITH “-08” SIZE ELEMENTS.
MAGNETIC PERMEABILITY SHALL BE LESS THAN 2.0 (AR = 10) FOR A FIELD STRENGTH H = 200OERSTEDS USING A MAGNETIC PERMEABILITY INDICATOR PER ASTM A342/A342M,TEST METHOD 3
THIS RETAINING CLIP S INTENDED FOR USE WIH THE NAS1794 NUT ELEMENT USED ON NAS1791NAS1792,NAS1793 PLATE NUT ASSEMBLIES AND NUMEROUS GANG CHANNEL ASSEMBLIES
ARMCO 18-2MN CRES PROCURED PRIOR TO 6/1/2007 MAY BE USED UNTIL DEPLETED. CLIPSPREVIOUSLY MANUFACTURED FROM ARMCO 18-2MN CRES OR 302 CRES PER AMS5688 AND MEETINGTHE MAGNETIC PERMEABILITY REQUIREMENT OF THIS STANDARD MAY BE PROCURED AND USEDUNTIL STOCKS ARE DEPLETED.
THIS STANDARD TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN.
UNLESS OTHERWISE SPECIFIED, PART INVENTORY MANUFACTURED TO PREVIOUS REVISIONS OFTHE APPLICABLE DRAWING OR SPECIFICATION MAY BE PROCURED AND USED UNTIL STOCK ISDEPLETED.
UNLESS OTHERWISE SPECIFIED HEREIN, REFERENCED DOCUMENTS SHALL BE THE ISSUE IN EFFECTON DATE OF MANUFACTURE HOWEVEREXTSTING ATERIAL INVENTORY CERTIETED TO APREVIOUS REVISION OF THE APPLICABLE MATERIAL SPECIFICATION(S) IS ACCEPTABLE FOR USEUNTIL DEPLETION.
DIMENSIONING AND TOLERANCING PER ANSI Y14.5M-1982

Share on Facebook

Post on X

Follow us

Save