AIA/NAS 1732-2012 pdf download NUT, BLIND, SERRATED HEAD, SELF-LOCKING, CLOSED END, 450 °F
MATERIAL:
CRES,304 (UNS S30400) OR 305 (UNS S30500) PER QQ-S-763 AMS-QQ-S-763, CONDITION A.
FINISH:
PASSIVATE PER AMS2700，METHOD 1，CLASS 4.CADMIUM PLATE PER AMS-QQ-P-416,TYPE IICLASS 2(WHEN SPECIFIED)./10/
LUBRICATION:
DRY FILM PER NASM25027 ON THREADS ONLY (WHEN SPECIFIED)
CODE:
ADD ”L”BETWEEN DASH NUMBERS FOR DRY FILM LUBRICANTADD “P”AFTER SECOND DASH NUMBER FOR CADMIUM PLATEFIRST DASH NUMBER INDICATES THREAD SIZE.SECOND DASH NUMBER INDICATES GRIP RANGE
EXAMPLES OF PART NUMBER:
NAS1732-4-6.2500-28 NUT，240-280 GRIP RANGEPASSIVATEDNAS1732-4L62500-28 NUT.240-280 GRIP RANGEPASSIVATED，THREADS LUBRICATEDl
NAS1732-4-6P=2500-28 NUT，.240-.280 GRIP RANGE,PASSIVATED，CADMIUM PLATEDNAS1732-4迁亚丑6P=2500-28 NUT，.240-.280 GRIP RANGE, PASSIVATED, THREADS LUBRICATED AND
OUTSIDE SURFACE CADMIUM PLATED
NOTES:
CONCENTRICITY: ALL DIAMETERS TO THE NUT CENTERLINE WITHIN .005 FIM.
SERRATION SHALL BE SHARP AND CLEAN FOR THE FULL LENGTH OF THE “H” DIMENSION.
SERRATION DEPTH SHALL BE TO THE OUTSIDE DIAMETER OF THE NUT OD WITHIN +.002/-.006
TOROUE OUT AND PUSH OUT VALUES LISTED ARE APPLICABLE WHEN NUTS ARE INSTALLED INSOLUTION HEAT TREATED AND ARTIFICIALLY AGED 2000 8 7000 SERIES ALUMINUM ALLOYS.
SURFACE ROUGHNESS: ALL NON-THREADED SURFACE TEXTURE SHALL NOT EXCEED 125 MICROINCHESRa PER ASME B46.1.MINOR THREAD MARKINGS ON ID OF NUT PERMISSIBLE.
FOR NUT SIZES 04″”06”，AND 08STAMP SIZE DASH NUMBERGRIP DASH NUMBER ANDMANUFACTURER’S TRADEMARK
REMOVE ALL BURRS AND SHARP EDGES
DIMENSIONS IN INCHES AND APPLY AFTER FINSH UNLESS OTHERWISE SPECIFIED.

Share on Facebook

Post on X

Follow us

Save