AIA/NAS 1686-2013 pdf download RIVET, BLIND, ALUMINUM SLEEVE, MECHANICALLY LOCKED SPINDLE, BULBED
1 . SCOPE
1 .1 . Scope. The specification establishes the requirements for procurement of self-plugging blind rivets, with a mechanically locked solid spindle, which can be installed in assemblies or construction. These blind rivets are intended for use in aircraft structural or similar applications in both thick and thin sheets. The bulbed blind head configuration makes these rivets especially suited for thin sheet or double dimpled applications.
1 .2 Styles, Classes, and Codes. Rivets shall be furnished in the following styles, classes and codes.
Style “A” Nominal Shank Diameter
Class 1 – Protruding Head Rivets (MS20470)
Code B – 5056 Aluminum Alloy Sleeve – Alloy Steel Spindle
Code E – 5056 Aluminum Alloy Sleeve – CRES Spindle
Class 2 – 1 00° Flush Head (MS20426)
Code B – 5056 Aluminum Alloy Sleeve – Alloy Steel Spindle
Code E – 5056 Aluminum Alloy Sleeve – CRES Spindle
Class 3 – 1 00° Flush Shear Head (NAS1 097)
Code B – 5056 Aluminum Alloy Sleeve – Alloy Steel Spindle
Code E – 5056 Aluminum Alloy Sleeve – CRES Spindle
Style “B” 1 /64” Oversize Shank Diameter
Class 1 – Protruding Head Rivets (MS20470)
Code B – 5056 Aluminum Alloy Sleeve – Alloy Steel Spindle
Code E – 5056 Aluminum Alloy Sleeve – CRES Spindle
Class 2 – 1 00° Flush Head (MS20426)
Code B – 5056 Aluminum Alloy Sleeve – Alloy Steel Spindle
Code E – 5056 Aluminum Alloy Sleeve – CRES Spindle
Class 4 – Flanged Dome Head
Code B – 5056 Aluminum Alloy Sleeve – Alloy Steel Spindle
Code E – 5056 Aluminum Alloy Sleeve – CRES Spindle
2. APPLICABLE DOCUMENTS
2.1 Publications. The following publications of the issue in effect on date of invitation for bids shall form a part of this specification to the extent specified herein.
2.1 .1 Military and Air Force-Navy Aeronautical Specifications
MIL-R-851 88 Riveter, Power, Pneumatic-Hydraulic Blind Rivet Installation
Copies can be obtained from the Department of Defense Single Stock Point (DODSSP). http://dodssp.daps.dla.mil
2.1 .2 Industry Specifications
SAE International
AMS-QQ-P-41 6 Plating, Cadmium (Electro-Deposited)
AMS2759 Heat Treatment of Steel Parts General Requirements
AMS5731 Steel Bars, Forgings, Corrosion and Heat Resistant (A286 CRES)
AMS5737 Steel Bars, Forgings, Corrosion and Heat Resistant (A286 CRES)
AMS5657 Alloy Wire, Corrosion and Heat Resistant (1 5-7 PH CRES)
AMS6322 Steel Bars, Forgings, and Rings (8740 Alloy Steel)
Copies can be obtained from SAE International, 400 Commonwealth Dr., Warrendale, PA 1 5096-0001 . www.sae.org American Society for Quality
ANSI/ASQ Z1 .4 Sampling Procedures and Tables For Inspection By Attributes
Copies can be obtained from the American Society for Quality, 600 North Plankinton Ave., Milwaukee, WI 53203.
www.asq.org
ASTM International
ASTM D 3951 Standard Practice for Commercial Packaging
Copies can be obtained from ASTM International, 1 00 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 1 9428-2959. www.astm.org
2.1 .3 Standards.
Federal Aviation Administration
MMPDS Metallic Materials Properties Development and Standardization
Military
MIL-STD-1 29 Marking For Shipment and Storage
MIL-STD-2073-1 Standard Practice for Military Packaging
Copies can be obtained from the Department of Defense Single Stock Point (DODSSP). http://dodssp.daps.dla.mil Aerospace Industries Association
NASM1 31 2-1 Fastener Test Methods – Salt Spray (MIL-STD-1 31 2-1 )
NASM1 31 2-8 Fastener Test Methods – Tensile Strength (MIL-STD-1 31 2-8)
NASM1 31 2-20 Fastener Test Methods – Single Shear (MIL-STD-1 31 2-20)
NASM1 31 2-21 Fastener Test Methods – Shear Joint Fatigue (MIL-STD-1 31 2-21 )
NASM33522 Rivet, Blind, Structural, Mechanically Locked and Friction Retainer Spindle, (Reliability and Maintainability), Design and Construction for,
Copies can be obtained from the Aerospace Industries Association, 1 000 Wilson Blvd., Suite 1 700, Arlington, VA 22209. www.aia-aerospace.org

Share on Facebook

Post on X

Follow us

Save