AIA/NAS 1383-2011 pdf download STRAP ASSEMBLY, TWO PART ADJUSTABLE
MATERIAL:
COTTON PER MIL-W-530. CLASS 4 EXGEPT TYPE- (5/8 WIDTH SIZE MODIFIED BY THICKNESS OF.055 土 .005).NYLON: 1”WIDE SIZE PER MIL-W-4088,TYPE XVII,CLASS 25/8”WIDE SIZE COMMERCIAL,1,500 LBF RATING,THICKNESS .055 土 .005.
CODE:
FIRST DASH NUMBER INDICATES FIXED END LENGTH.SECOND DASH NUMBER INDICATES OVERALL LENGTH.LETTER FOLLOWING BASIC NUMBER INDICATES FITTING OR TREATMENT OF FIXED END: ALSO WIDTH
OF STRAPLETTER FOLLOWING FIRST DASH NUMBER INDICATES FITTING OR TREATMENT OF ADJUSTABLE END.LETTER FOLLOWING SECOND DASH NUMBER INDICATES MATERIAL AND COLOR
EXAMPLE OF PART NUMBER:
NAS1383A12C36N1 INCH OLIVE DRAB COTTON STRAP WITH RING ON FIXED FIND，SIZE TBUCKLE AND TYPE C HOOK ON ADJUSTABLE END,36 INCH OVERALL WITH 6INCH HAND HOLD.
NOTES:
LENGTH IS EFFECTIVE LENGTH WITH STRAP THREADED THRU BUCKLE AND 6 INCH HAND HOLD
RATED TENSILE STRENGTH S ESTABLISHED AS THE MAXIMUM LOAD THAT MAY BE APPLIED TO THESTRAP ASSEMBLY WITHOUT FAILURE OF A COMPONENT OR SLIPPAGE OF STRAP THRU BUCKLE.
STITCHING PER ASTM D6193
CODE LETTERS“B”“F”“W”&“K”ARE INACTIVE FOR DESIGN AFTER 15 MARCH 1979.FORDESCRIPTION OF STATUS NOTES,SEE NAS380.
DIMENSIONS IN INCHES
THIS STANDARD TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN.
UNLESS OTHERWISE SPECIFIED, PART INVENTORY MANUFACTURED TO PREVIOUS REVISIONS OF THEAPPLICABLE DRAWING OR SPECIFICATION MAY BE PROCURED AND USED UNTIL STOCK IS DEPLETED.
UNLESS OTHERWISE SPECIFIED HEREIN, REFERENCED DOCUMENTS SHALL BE THE ISSUE IN EFFECTON DATE OF MANUFACTURE. HOWEVER, EXISTING MATERIAL INVENTORY CERTIFIED O A PREVIOUSREVISION OF THE APPLICABLE MATERIAL SPECIFICATION(S) IS ACCEPTABLE FOR USE UNTILDEPLETION.
DIMENSIONING AND TOLERANCING PER ANSI Y14.5M-1982

Share on Facebook

Post on X

Follow us

Save