Free Standards Download

EN 843-2-2006 pdf download.Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 2: Determination of Young’s modulus, shear modulus and Poisson’s ratio. NOTE 2 If the availability of test material allows, a...

EN 843-4-2005 pdf download.Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 4: Vickers,Knoop and Rockwell superficial hardness. Inspect the shape of the indentations for regularity, and reject any that show suspected...

EN 843-3-2005 pdf download.Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature- Part 3: Determination of subcritical crack growth parameters from constant stressing rate flexural strength tests. Measure the test jag span(s) to the...

EN 821-3-2005 pdf download.Advanced technical ceramics - Monolithic ceramics. Thermophysical properties - Part 3: Determination of specific heat capacity. 4.4 Temperature measurement and calibration 4.4.1 For furnace temperatures below 1650 ‘C. the initial temperature of the test...

EN 1006-2009 pdf download.Advanced technical ceramics - Monolithic ceramics - Guidance on the selection of test pieces for the evaluation of properties. 3.3 Test method accuracy 3.3.1 Most test methods specifically developed for advanced technical ceramics have...

EN 820-4-2009 pdf download.Advanced technical ceramics - Thermomechanical properties of monolithic ceramics - Part 4: Determination of flexural creep deformation at elevated temperatures. leading to acceleration of creep rate and the linking of damage to form cradcs...

EN 1007-5-2010 pdf download.Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Part 5: Determination of distribution of tensile strength and of tensile strain to failure of filaments within a multifilament tow at...

EN 1007-7-2010 pdf download.Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Part 7: Determination of the distribution of tensile strength and of tensile strain to failure of filaments within a multifilament tow...

EN 1071-12-2010 pdf download.Advanced technical ceramics - Methods of test for ceramic coatings - Part 12: Reciprocating wear test. Reciprocating wear testing can be used to simulate the operating conditions in different sliding contacts of technological significance....

EN 843-8-2010 pdf download.Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 8: Guidelines for conducting proof tests. 5 Main considerations The short-term fracture stress of an advanced technical ceramic component is...