ANSI C78.379-2006 pdf download American National Standard for electric lamps— Classification of the Beam Patterns of Reflector Lamps 1 Scope, purpose, and application 1.1 Scope This standard describes a system for classification of beam patterns and beam...
ANSI C80.5-2005 pdf download
ANSI C80.5-2005 pdf download American National Standard for Electrical Rigid Aluminum Conduit (ERAC) 6.5 Couplings Couplings shall comply with the following requirements: 6.5.1 The coupling shall be made of an aluminum alloy containing not more than 0.40%...
ANSI C82.6-2005 pdf download
ANSI C82.6-2005 pdf download American National Standard for lamp ballasts— Ballasts for High-Intensity Discharge Lamps – Methods of Measurement 3.0 DEFINITIONS Definitions of terms that apply specifically to the subject treated in this standard are given in...
ANSI CTA-885-2007 pdf download
ANSI CTA-885-2007 pdf download Remote Starter Safety ANSI/CEA-885 R-201 3 April 2007 3 Run Time Any remote starter complying with this standard shall not have a run-time of greater than continuous 30 minutes under any circumstances. In...
ANSI CTA-2015-2007 pdf download
ANSI CTA-2015-2007 pdf download Mobile Electronics Cabling Standard ANSI/CTA-2015 R2017 (Formerly ANSI/CEA-2015) 4 Power Handling Capability The power handling capability of any cable is dependent on the material used to make the cable, and the size of...
ANSI E1.15-2006 pdf download
ANSI E1.15-2006 pdf download American National Standard E1.15 - 2006 Entertainment Technology Recommended Practices and Guidelines for the Assembly and Use of Theatrical Boom & Base Assemblies 4.2.1 Slope Test The stability of the assembly shall be...
ANSI E1.26-2006 pdf download
ANSI E1.26-2006 pdf download American National Standard E1.26 - 2006 Entertainment Technology Recommended Testing Methods and Values for Shock Absorption of Floors Used in Live Performance Venues 4.5 A minimum of 5 points (as defined in Appendix...
ANSI E1.27-1-2006 pdf download
ANSI E1.27-1-2006 pdf download ANSI E1.27-1 - 2006 (R2016) Entertainment Technology—Standard for Portable Control Cables for Use with ANSI E1.11 (DMX512-A) and USITT DMX512/1990 Products 3.4 Data-: signal complement. 3.5 Data Link: The physical connection between transmitting...
ANSI ESD-S1.1-2006 pdf download
ANSI ESD-S1.1-2006 pdf download For the Protection of Electrostatic Discharge Susceptible Items Wrist Straps 5.1.3 Reporting Report the resistance for each wrist strap. 5.2 Cuff Resistance Test Resistance of the cuff interior and exterior is determined. 5.2.1...
ANSI ESD-S4.1-2006 pdf download
ANSI ESD-S4.1-2006 pdf download For the Protection of Electrostatic Discharge Susceptible Items Worksurfaces – Resistance Measurements 6.0 TEST METHODS This section describes the test methods to be used to measure the worksurface materials: A) prior to installation...