Free Standards Download

ANSI SCTE-101-2011 pdf download “Mainline” Splice Connector Return Loss 1.0 SCOPE AND DEFINITIONS 1.1 This document describes a procedure to measure the Return Loss characteristics of a single Mainline Splice Connector interfaced between (2) mainline cables. It...

ANSI SCTE-110-2011 pdf download Hybrid Fiber Coax Outside Plant Status Monitoring: Alternative Power Supply to Transponder Interface Bus (PSTIB) For HMS Transponders 2.2 Section 3.1.4 of ANSI/SCTE 25-3 2010 Section 3.1.4 of ANSI/SCTE 25-3 20101 shall be...

ANSI SCTE-112-2011 pdf download HMS / DOCSIS ® Transponder for Outside Plant Power Supply 1.0 SCOPE This document contains the requirements for a “HMS / DOCSIS ® Transponder for Outside Plant Power Supply.” The HMS / DOCSIS...

ANSI SCTE-115-2011 pdf download Test Method for Reverse Path (Upstream) Intermodulation Using Two Carriers 1.0 SCOPE 1.1 This test procedure defines a method of measurement of intermodulation distortion in the reverse “upstream” path of Cable Telecommunications equipment....

ANSI SCTE-116-2011 pdf download Specification for 5/8-24 Port, Female Adapters 1.0 SCOPE The purpose of this specification is to serve as a recommended guideline for the physical dimensions of female 5/8 - 24 port that is used...

ANSI SCTE-119-2011 pdf download Measurement Procedure for Noise Power Ratio 1.0 SCOPE This procedure defines a method of measurement for Noise Power Ratio (NPR) of active Cable Telecommunications equipment. It is intended for measurement of 75-ohm devices...

ANSI SCTE-120-2011 pdf download Test Method for Balance Ratio of 75-300 Ohm Matching Transformer 1.0 SCOPE AND DEFINITIONS 1.1 This test procedure provides a method for measuring the balance ratio of broadband radio frequency (RF) devices whose...

ANSI SCTE-123-2011 pdf download Specification for “F” Connector, Male, Feed-Through 1.0 SCOPE The purpose of this document is to specify requirements for male “F” feed-through connectors that are used in the 75 ohm RF broadband communications industry....

ANSI SCTE-124-2011 pdf download Specification for “F” Connector, Male, Pin Type 1.0 SCOPE The purpose of this document is to specify requirements for male “F” pin type connectors that are used in the 75 ohm RF broadband...

ANSI SCTE 125-2011 pdf download Hard Line Pin Connector Return Loss 1.0 SCOPE AND DEFINITIONS 1.1 This document describes a procedure to measure the Return Loss characteristics of a single Hard Line Pin Connector interfaced between (1)...