Free Standards Download

IEEE C37.2-1991 pdf download

IEEE C37.2-1991 pdf download.IEEE Standard Electrical Power System Device Function Numbers. Abstract: The definition and application of function numbers for devices used in electrical substations and generating plants and in installations of power utilization and conversion apparatus...

01-03

IEEE 303-1991 pdf download

IEEE 303-1991 pdf download.IEEE Recommended Practice for Auxillary Devices for Motors in Class I, Groups A,B,C, and D, Division 2 Locations. Abstract: Installation procedures and wiring methods and materials are recommended. Termination housings, motor surge protection, and...

01-03

IEEE C37.111-1991 pdf download

IEEE C37.111-1991 pdf download.IEEE Standard Common Format for Transient Data Exchange (COMTRADE) for Power Systems. The rapid evolution and implementation of digital devices for fault and transient data recording and testing in the electric utility industry has...

01-03

IEEE 436-1991 pdf download

IEEE 436-1991 pdf download.IEEE Guide for Making Corona (Partial Discharge) Measurements on Electronics Transformers. Abstract: A uniform procedure for making corona (partial discharge) measurements by electrical means on electronic transformers is presented. Methods of applying voltage stress,...

01-03

BS ISO 14743:2020 pdf download

BS ISO 14743:2020 pdf download.Pneumatic fluid power - Push-in connectors for thermoplastic tubes. In pneumatic fluid power systems, power is transmitted and controlled through air under pressure within a circuit. Components are connected through their ports by...

01-01

BS 5500-1997 pdf download

BS 5500-1997 pdf free download.SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS. 1.1.1 BS 5500-1997 specifies requirements for the design, construction, inspection, testing and verification of compliance of unfired fusion welded Iresslire vessels. The materials of construction are...

12-29

IEEE 422-1986 pdf download

IEEE 422-1986 pdf free download.IEEE Guide for the Design and Installation of Cable Systems in Power Generating Stations. 1.1 Scope and Purpose. IEEE 422-1986 has been developed as a guide for the design and installation of wire...

12-28

IEEE 386-1985 pdf download

IEEE 386-1985 pdf download.IEEE Standard for Separable Insulated Connector Systems for Power Distribution Systems Above 600 V. IEEE 386-1985 establishes definitions, service conditions, ratings, Interchangeable consnction features and tests for load-break and dead-break separable insulated connector systems...

12-28

IEEE 498-1985 pdf download

IEEE 498-1985 pdf free download.IEEE Standard Requirements for the Calibration and Control of Measuring and Test Equipment Used in Nuclear Facilities. 1.1 Scope. This standard sets forth the requirements for a calibration program to control and verify...

12-28

ASTM D2939-98 pdf download

ASTM D2939-98 pdf free download.Standard Test Methods for Emulsified Bitumens Used as Protective Coatings. ASTM D2939-98 covers procedures for sampling and testing emulsified bitumens used in relatively thick films as protective coatings for metals and built-up roofs....

12-28