Free Standards Download

IEEE 187-1990 pdf download

IEEE 187-1990 pdf download.IEEE Standard on Radio Receivers: Open Field Method of Measurement of Spurious Radiation from FM and Television Broadcast Receivers. Abstract: IEEE Std 187-1990, EEE Standard on Radio Receivers: Open Field Method of Measurement of...

01-11

IEEE 1101.2-1992 pdf download

IEEE 1101.2-1992 pdf download.IEEE Standard for Mechanical Core Specifications for Conduction-Cooled Eurocards. Abstract:Mechanical characteristics of conduction-cooled versions of Eurocard-based circuit card assemblies are described. This specification is applicable to, but not limited to, the VMEbus standard, an...

01-10

IEEE 421.5-1992 pdf download

IEEE 421.5-1992 pdf download.IEEE Recommended Practice for Excitation System Models for Power System Stability Studies. Abstract: Excitation system models suitable for use in large scale system stability studies are presented With these models, most of the excitation...

01-10

IEEE 519-1992 pdf download

IEEE 519-1992 pdf download.IEEE Recommended Practices and Requirements for Harmonic Control in Electrical Power Systems. Abstract: This guide applies to all types of static power converters used in industrial and commercial power systems. The problems involved in...

01-10

IEEE 524-1992 pdf download

IEEE 524-1992 pdf download.IEEE Guide to the Installation of Overhead Transmission Line Conductors. Abstract:General recommendations for the selection of methods, equipment, and tools that have been found to be practical for the stringing of overhead transmission line...

01-08

IEEE 269-1992 pdf download

IEEE 269-1992 pdf download.IEEE Standard Methods for Measuring Transmission Performance of Analog and Digital Telephone Sets. Abstract:Practical methods for measuring the transmission characteristics of both digital and conventional to wire analog telephone sets by means of objective...

01-08

IEEE C57.12.56-1986 pdf download

IEEE C57.12.56-1986 pdf download.IEEE Standard Test Procedure for Thermal Evaluation of Insulation Systems for Ventilated Dry-Type Power and Distribution Transformers. IEEE C57.12.56-1986 is intended to establish a uniform method for determining the temperature classification of ventilated dry-type...

01-06

IEEE 1-1986 pdf download

IEEE 1-1986 pdf download.IEEE Standard General Principles for Temperature Limits in the Rating of Electric Equipment and for the Evaluation of Electrical Insulation. These principles are intended to serve as a guide in the preparation of IEEE...

01-06

IEC 61109:2008 download

IEC 61109:2008 pdf download.Insulators for overhead lines - Composite suspension and tension insulators for a.c. systems with a nominal voltage greater than 1 000 V - Definitions, test methods and acceptance criteria. IEC 61109:2008 applies to composite...

01-05

IEEE C62.64-2009 pdf download

IEEE C62.64-2009 pdf download.IEEE Standard Specifications for Surge Protectors Used in Low-Voltage Data, Communications,and Signaling Circuits. This revision of IEEE Std C62.64-1997 has been developed by the Low-Voltage Data, Communications, and Signaling Circuit Surge Protective Devices Working...

01-05