Free Standards Download

AS NZS 3003:2018 Electrical installations——Patient areas

AS NZS 3003:2018 pdf download.Electrical installations——Patient areas. 2.1 GENERAL All patient areas shall be body-protected electrical areas or cardiac-protected electrical areas.Body-protected electrical areas shall be in accordance with the requirements of this Section and Section 3. Cardiac-protected...

07-11

AS ISO 7240.18:2018 pdf download

AS ISO 7240.18:2018 pdf download.Fire detection and alarm systems Part 18: Input/ output devices. 4 Requirements 4.1 Compliance 4.1.1 In order to comply with this document, the input/output device shall: a) meet the requirements of Clause 4,...

07-11

EN 1014-4-2010 pdf download

EN 1014-4-2010 pdf download.Wood preservatives - Creosote and creosoted timber - Methods of sampling and analysis - Part 4: Determination of the waterextractable phenols content of creosote. ultraviolet detector capable of being set at an absorption wavelength...

07-11

EN 1007-7-2010 pdf download

EN 1007-7-2010 pdf download.Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Part 7: Determination of the distribution of tensile strength and of tensile strain to failure of filaments within a multifilament tow...

07-11

EN 1706-2010 pdf download

EN 1706-2010 pdf download.Aluminium and aluminium alloys-Castings - Chemical composition and mechanical properties. This EN 1706 speciftes the chemical composition hmts for aluminmjrn casting alloys and mechanical properties ci separately cast test pieces for these alloys. Arviex...

07-11

EN 1676-2010 pdf download

EN 1676-2010 pdf download.Aluminium and aluminium alloys-Alloyed ingots for remelting Specifications. ingot for remelting metal cast into a form suitable for remelting wtilch has been processed, as appropnate. to adjust the chemical composition and to remove certain...

07-11

EN 1458-2-2011 pdf download

EN 1458-2-2011 pdf download.Domestic direct gas-fired tumble dryers of types B22D and B23D, of nominal heat input not exceeding 6 kW - Part 2:Rational use of energy. This EN 1458-2 specifies the requirements and test methods for...

07-11

EN 1071-12-2010 pdf download

EN 1071-12-2010 pdf download.Advanced technical ceramics - Methods of test for ceramic coatings - Part 12: Reciprocating wear test. Reciprocating wear testing can be used to simulate the operating conditions in different sliding contacts of technological significance....

07-11

EN 843-8-2010 pdf download

EN 843-8-2010 pdf download.Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 8: Guidelines for conducting proof tests. 5 Main considerations The short-term fracture stress of an advanced technical ceramic component is...

07-11

EN 61000-4-4-2012 pdf download

EN 61000-4-4-2012 pdf download.Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transientlburst immunity test. A ground reference plane as described in 7.3.1 shall be mounted near the ELJT and connected to the...

07-11