Free Standards Download

EN 14597-2012 pdf download

EN 14597-2012 pdf download.Temperature control devices and temperature limiters for heat generating systems. 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 60730-2-9:2010, Clause 2 and the following apply....

07-10

EN 14052-2012 pdf download

EN 14052-2012 pdf download.High performance industrial helmets. 6.3.2 Selection of size Five size designations of headform are specified for use in this European Standard, 495, 535, 575. 605 and 625 (EN 960:2006 — these are equivalent to...

07-10

EN 13336-2012 pdf download

EN 13336-2012 pdf download.Leather - Upholstery leather characteristics - Guide for selection of leather for furniture. This EN 13336 gives guidelines for the test methods and recommended values for upholstery leather for furniture. This European Standard also...

07-10

EN 10223-4-2012 pdf download

EN 10223-4-2012 pdf download.Steel wire and wire products for fencing and netting-Part 4 Steel wire welded mesh fencing. g ) length and width of rolls or size of panels h ) the class of zinc or zinc...

07-10

EN 10218-2-2012 pdf download

EN 10218-2-2012 pdf download.Steel wire and wire products-General - Part 2 : Wire dimensions and tolerances. This EN 10218-2 specifies the tolerances on diameter of round wire and , where applicable , on the wire cut to length...

07-10

EN 2242-2012 pdf download

EN 2242-2012 pdf download.Aerospace series - Crimping of electric cables with conductors defined by EN 2083, EN 4434 and EN 2346. 3 Terms and definitions For the purposes of this document, the following terms and definitions apply....

07-10

EN 1976-2012 pdf downl

EN 1976-2012 pdf download.Copper and copper alloys - Cast unwrought copper products. 7 Sampling 7.1 Arrangement of lots for sampling purposes For refinery shapes produced in a batch process, the manufacturer shall arrange lots fo sampling purposes...

07-10

EN 1957-2012 pdf download

EN 1957-2012 pdf download.Furniture - Beds and mattresses - Test methods for the determination of functional characteristics and assessment criteria. 5.7 Equipment for recording the load/deflection curves The equipment for recording the load/deflection curves shall be a...

07-10

EN 1034-27-2012 pdf download

EN 1034-27-2012 pdf download.Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 27:Roll handling systems. Tables 1 and 4; fencing shall have a minimum height of 1.40...

07-10

EN 1034-8-2012 pdf download

EN 1034-8-2012 pdf download.Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 8:Refining plants. 5.5 Power, temperature and pressure control system, forced lubrication system 5.5.1 Refiner drives...

07-10