Free Standards Download

BS/EN 197-2-2020 pdf download

BS/EN 197-2-2020 pdf download.Cement Part 2 : Assessment and verification of constancy of performance. 5.3.1 InspectIon of the factory and the factory production control Inspection shall Include checking that any change in the Works’ quality documentation, which...

07-21

BS/EN 113-2-2020 pdf download

BS/EN 113-2-2020 pdf download.Durability of wood and wood-based products — Test method against wood destroying basidiomycetes Part 2: Assessment of inherent or enhanced durability. direction. Transverse cuts shall be made neatly to give sharp edges and a...

07-21

BS/EN 13850-2020 pdf download

BS/EN 13850-2020 pdf download.Postal services — Quality of services — Measurement of the transit time of end-to-end services for single piece priority mail and first class mail. The overall transit time Q0S level is to be expressed...

07-21

EN 50059-1990 pdf download

EN 50059-1990 pdf download.Specification for electrostatic hand-held spraying equipment for non-flammable material for painting and finishing. 3.3 Electrical requirements 3.3.1 Any cable to the spray gun, other than that carrying only functional extra-low voltage circuits without electrical...

07-21

EN 28630-2-1992 pdf download

EN 28630-2-1992 pdf download.Information processing — Data interchange on 130 mm (5.25 in) flexible disk cartridges using modified frequency modulation recording at 13 262 ftprad, on 80 tracks each side Part 2: Track format A for 77...

07-21

EN 26520-1991 pdf download

EN 26520-1991 pdf download.Classification of imperfections in metallic fusion welds with explanations. A.1 This annex is intended: — for one part, to avoid contusion between the two numbeflng systems regarding the level of Interpretation; — for the...

07-21

EN 24937-1990 pdf download

EN 24937-1990 pdf download.Steel and iron-Determination of chromium content Potentiometric or visual method. 5 Apparatus Ordinary laboratory apparatus (see the note) and 5.1 Potentiornetric titration device, which permits a difference in potential to he measured with platinum-saturated...

07-21

EN 10163-2-1991 pdf download

EN 10163-2-1991 pdf download.Delivery requirements for surface condition of hot rolled steel plates, wide flats and sections — Part 2: Plate and wide flats. This Part 2 in addition to Part 1 specifies the delivery requirements which...

07-21

EN 10045-1-1990 pdf download

EN 10045-1-1990 pdf download.Charpy impact test on metallic materials Part 1 . Test method ( V-and U-notches). 1.1 This Part of this EN 10045-1 describes the Charpy impact test (U and V-notch) for metalhc materials. For certain...

07-21

EN 2609-1988 pdf download

EN 2609-1988 pdf download.Aerospace series Turnbarrels control cable In copper-zinc alloys Dimensions and loads. This EN 2609 specifies the characteristics of turnbarrels in copper-zinc alloys intended for aircraft control cables. 2 References Iso 426-2:1983, Wrought copper-zinc alloys...

07-21