Free Standards Download

BS 8588:2017 pdf download

BS 8588:2017 pdf download.Polyethylene pressure pipe with an aluminium barrier layer and associated fittings for potable water supply in contaminated land - Size 20 mm to 630 mm. Definition of operative pipe outside diameter Specified outside diameters...

07-22

BS 8613:2017 pdf download

BS 8613:2017 pdf download.Finger protection devices for pedestrian doors - Specification. 5.1 General requirements The manufacturer shall indicate the type(s) of doors, including the thickness and the materials (e.g. aluminium, PVC, wood), for which the device is...

07-22

BS EN 131-2:2010 pdf download

BS EN 131-2:2010 pdf download.Ladders Part 2: Requirements, testing, marking. This European Standard specifies the general design features, requirements and test methods for portable ladders It does not apply to step stools or ladders for specific professional...

07-22

BS 7499:2020 pdf download

BS 7499:2020 pdf download.Provision of static guarding security services - Code of practice. This British Standard gives recommendations for the management, staffing and operation of an organization providing security guarding services on a static site. NOTE AnnexA...

07-22

BS 7967-5-2010 pdf download

BS 7967-5-2010 pdf download.Carbon monoxide in dwellings and other premises and the combustion performance of gas-fired appliances Part 5: Guide for using electronic portable combustion gas analysers in non-domestic premises for the measurement of carbon monoxide and...

07-22

EN 17389-2020 pdf download

EN 17389-2020 pdf download.Stationary source emissions - Quality assurance and quality control procedures for automated dust arrestment plant monitors. e) confirming, according to manufacturer’s specifications, that the instrument responds to dust (where applicable, review historical data and...

07-22

EN 17371-3-2020 pdf download

EN 17371-3-2020 pdf download.Provision of services - Part 3: Management of Performance Measurement - Guidance on the mechanism to measure performance as part of service contracts. The measure and collect method is the low-level process to collect...

07-22

EN 17333-5-2020 pdf download

EN 17333-5-2020 pdf download.Characterisation of one component foam - Part 5 Insulation. This EN 17333-5 specifies test methods for the evaluation of the insulation properties for moisture curing, self-curing activatable or water drying foams dispensed from single...

07-22

EN 17333-4-2020 pdf download

EN 17333-4-2020 pdf download.Characterisation of one component foam-Part 4 Mechanical strength. 4.2.5 Expression of results In total there are six measurements. Three moistened and three dry joints. Take the mean value of the three measurements; report whether...

07-22

EN 17333-3-2020 pdf download

EN 17333-3-2020 pdf download.Characterisation of one component foam - Part 3 Application. 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 923 and the following apply. ISO and IEC...

07-22