Free Standards Download

ASME PTC 4:1998 pdf download Fired Steam Generators 1.2 SCOPE 1.2.1 General Scope. The rules and instructions presented in this Code apply to fired steam generatorsThese include coal, oil, and gas fired steam generatorsas well as steam...

ASME B18.18.7M:1998 pdf download Qality Asurance Plan for Fasteners Produced in a Customer Approved Control Plan 1.1 Scope This plan is based on the concept that a writtencontrol plan outlining the fastener manufacturing processand identification of its...

ASME PTC 6:1996 pdf download Performance Test Code 6 on Steam Turbines 1.2 SCOPE This Code may be used for testing of steamturbines operating either with a significant amountof superheat in the initial steam (typically fossil-fueled units)...

ASME PTC 12.2:1998 pdf download Performance Test Code on Steam Surface Condensers 11 OBJECT This Code provides standard directions and rulesfor conducting and reporting performance tests ofwater-cooled，steam surface condensers, hereafterreferred to as condensers. The Code provides explicittest...

ASME PTC 19.1:1998 pdf download Test Uncertainty 3.2 GLOSSARY accuracy: the closeness of agreement between a mea-sured vaiue and the true vaiue. calibration: the process of comparing the response ofan instrument to a standard instrument over somemeasurement...

ASME PTC 19.11:1997 pdf download Steam and Water Sampling, Conditioning, and Analysis in the Power Cycle 2.1 INTRODUCTION Sample point and analysis selection depend upon the purpose of testing. Each cycle component has a particular function. An...

ASME PTC 22:1997 pdf download PerformanceTest Code onGas Turbines 2.1 GENERAL DEFINITIONS 2.1.1 units: This Code uses U.S. Customary UnitsFor conversion to SI Units, see Appendix A 2.1.2 standard atmospheric conditions:14.696 psia(101.325 kPa),59F(28815),and relative humidity of 60%...

ASME PTC 25:1998 pdf download Special Addenda to ASME PTC 25-1994 Pressure Relief Devices 4.7.7 Observation of Mechanical Characteris- tics. During the tests with superimposed or built- up back pressure, mechanical characteristics shall be observed by hearing,...

ASME PTC 46:1997 pdf download Performance Test Code on Overall Plant Performance 3.1 INTRODUCTION This Section provides guidance on the conductof overall plant testing, and outlines the steps required to plan, conduct, and evaluate a Code testofoverali...

ASME PTC-10:1997 pdf download Performance Test Code on Compressors and Exhausters 1.1 OBJECT The object of this Code is to provide a testprocedure to determine the thermodynamic performance of an axial or centrifugal compressor or exhauster doing...