ASME A112.19.12:2000 pdf download WALL MOUNTED ANDPEDESTAL MOUNTEDADJUSTABLE ANDPIVOTING LAVATORYANDSINK CARRIER SYSTEMS 1 GENERAL 1.1 Scope This Standard establishes physical mechanica!, materiai,testing,marking. and documentation requirementsfor wall mounted and pedestal mounted adjustable andpivoting iavatones and sink carrier systems...
ASME B15.1:2000 pdf download
ASME B15.1:2000 pdf download SAFETY STANDARD FOR MECHANICAL POWER TRANSMISSION APPARATUS 1.1 Scope The requirements of this Standard apply to any sourceof hazard to people from the operation of mechanica!power transmission apparatus on machines, equipmentor systems that...
ASME B16.10:2000 pdf download
ASME B16.10:2000 pdf download FACE-TO-FACE AND END-TO-END DIMENSIONS OF VALVES 1 SCOPE 1.1 General This Standard covers face-to-face and end-to-enddimensions of straightway alves, and center-to-face andcenter-to-end dimensions of angle valves. Its purpose isto assure installation interchangeability for...
ASME B16.20a:2000 pdf download
ASME B16.20a:2000 pdf download METALLIC GASKETS FOR PIPE FLANGES Ring-Joint, Spiral-Wound, and Jacketed 1 SCOPE 1.1 General This Standard covers materials, dimensions, tolerances, and markings for metal ring-joint gaskets, spiral-wound metal gaskets, metal-jacketed gaskets, and fillermaterial. These...
ASME B16.49:2000 pdf download
ASME B16.49:2000 pdf download FACTORY-MADE WROUCHT STEEL BUTTWELDING INDUCTI"' BENDS FOR TRANSPORTATION AND DISTRIBUTION SYSTEMS 1 SCOPE AND DEFINITIONS 1.1 General This Standard covers design, material, manufacturingtesting,marking,and inspection requirements for factory-made pipeline bends of carbon steel materialshaving...
ASME B18.2.3.1M:1999 pdf download
ASME B18.2.3.1M:1999 pdf download METRIC HEX CAP SCREWS 1 INTRODUCTORY NOTES 1.1 Scope 1.1.1 This Standard covers the complete general anddimensional data for metric series hex cap scrcwsrecognized as American National Standard. 1.1.2 The inclusion of dimensional...
ASME B18.6.7M:1999 pdf download
ASME B18.6.7M:1999 pdf download METRIC MACHINE SCREWS 1.1 Scope 1.1.1 This Standard covers the complete generaland dimensional data for metric fat countersunk. ovalcountersunk and pan slotted and recessed head machinescrews,and mctric hex and hex flange head machinescrews...
ASME B18.21.1:1999 pdf download
ASME B18.21.1:1999 pdf download LOCK WASHERS (INCH SERIES) 2.7 Processing 2.7.1 Finishes. Unless otherwise specified by thepurchaser, lock washers shall be supplied with a plain(as processed) finish, not plated or coated. Wherecorrosion preventative treatment is required, washersshall...
ASME B30.8:1999 pdf download
ASME B30.8:1999 pdf download Construction and Installation Section 8-1.1 Load Ratings and Marking 8-1.1.1 Basis, The ioad raring of a fioating craneor floating derrick is dependent upon its structuralcompctence, rope strength, hoist capacity, and structuralattachmcnt to thc...
ASME B30.10:1999 pdf download
ASME B30.10:1999 pdf download HOOKS Section 10-0.1: Scope of ASME B30.10 Within the gencral scope defined in Section I, ASMEB30.10 applies to all types of hooks shown in Figs1 through 2! used in conjunction with equipmentdescribed in...