Free Standards Download

ASME A112.18.3:2002 pdf download PERFORMANCEREQUIREMENTS FORBACKFLOWPROTECTION DEVICES AND SYSTEMS IN PLUMBING FIXTUREFITTINGS laborafory fitting: a fitting terminating with a serratedhose tip. potable wafer: water which is suitable for drinking andfree from impurities present in amounts which are...

ASME A112.19.17:2002 pdf download MAMUFACTURED SAFETY VACUUM RELEASE SYSTEMS (SVRS) FOR RESIDENTIAL AND MMMERCIAl SWIMMINC POO1 POO1 SUCTION SYSTEMS GENERAL1 1.1 Scope This Standard establishes general requirements.dimensions and tolerances,materials,installationinstructions, testing requirements, and markings andidentification for SVRS devices.SVRS...

ASME AS-11:2002 pdf download OF CODESST ANDAR DS A NORELATED CONF ORMIITY ASSESSMENT CO MMITTEES AS-11 complements AC-10. Where AC-10 includes the personnel of the Board of Governors, councilsboards, and technical and regional committees, AS-11 includes the...

ASME B1.30:2002 pdf download GENERAL DESCRIPTION AND DEFINITIONS OF TERMS 1 INTRODUCTION This American National Standard establishes technical requirements for workholding chucks used primarilyin turning operations.It covers jaw type chucks whethemanual or power-operated. 2 SCOPE This Part...

ASME B16.21:2001 pdf download Nonmetallic Flat Gaskets for Pipe Flanges 1SCOPE This Standard covers types, sizes, materials, dimensions, tolerances, and markings for nonmetallic flatgaskets.These gaskets are dimensionally suitable foruse with flanges described in the referenced flangestandards. 2...

ASME B5.60:2002 pdf download WORKHOLDING CHUCKS: JAW TYPE CHUCKS Incorporating ASME B5.60.1 and ASME B5.60.4 1 INTRODUCTION This American National Standard establishes technical requirements for workholding chucks used primarilyin turning operations, It covers jaw type chucks whethermanual...

ASME B5-60:2002 pdf download WORKHOLDING CHUCKS: JAW TYPE CHUCKS Incorporating ASME B5.60.1 and ASME B5.60.4 1 INTRODUCTION This American National Standard establishes technical requirements for workholding chucks used primarilyin turning operations. It covers jaw type chucks whethermanual...

ASME B16.33:2002 pdf download MANUALLY OPERATED METALLIC GAS VALVES FOR USE IN GAS PIPING SYSTEMS UP TO 125 PSI (SIZES NPS 1 / 2 THROUGH NPS 2) ASME B16.33-2002 (Revision of ASME B16.33-1990) Copyrighted material licensed to...

ASME B16.40:2002 pdf download MANUALLY OPERATED THERMOPLASTIC GAS SHUTOFFS AND VALVES IN GAS DISTRIBUTION SYSTEMS 1 SCOPE (a) This Standard covers manually operated thermoplastic valves in nominal sizes / through 6 (as shownin Table 5).These valves are...

ASME B16.44:2002 pdf download MANUALLYOPERATED METALLIC GAS VALVES FOR USEIN ABOVEGROUND PIPING SYSTEMS UP TO 5 PSI 1 SCOPE 1.1 General This Standard applies to neww valve construction andcovers quarter turn manually operated metallic valvesin sizes NPS...