Free Standards Download

ASME B107.54:2001 pdf download HEAVY STRIKING TOOLS: SAFETY REQUIREMENTS 1 GENERAL 1.1 Scope This Standard provides safety requirements for thedesign, construction, testing, and use of the followingstyles of heavy striking tools. The names given andintended uses are...

ASME B107.57:2001 pdf download BRICKLAYERS'HAMMERS AND PROSPECTING PlCKS: SAFETY REOUIREMENTS blade: the tapered ponjon of the bricklayers' hammerhead directly opposite the face. chamtfer: the angled hat surface or cquivalent radiuscncircling the permeler of the face of the...

ASME SEC II A:2001 pdf download The 2001 Edition of the Code contains both U.S. Customary and SI units. In all cases, the U.S. Customary units are the standard and SI units are provided for the convenience...

ASME MFC-18M:2001 pdf download MEASUREMENT OF FLUID FLOW USING VARIABLE AREA METERS 1 SCOPE This Standard describes the common variable areaflowmeter.This Standard does not attempt to standardizedimensions because the commercial products differ toowidely. The variable area meter...

ASME PTC 2:2001 pdf download DEFINITIONS AND VALUES 2.1 INTRODUCTION The Codes provide test procedures which yieldresults of the highest level of accuracy consistentwith the best engineering knowledge and practicetaking into account the cost of tests and...

ASME QEI-1:2001 pdf download PART 1 INTRODUCTION 1.1 Scope 1.7.1 Inspectors and Inspection Supervisors.This Standard includes requirements for the qualification, duries,and responsibilities of inspectors and inspection supervisurs engaged in the inspection and testing oi(a) hoisting and lowering...

ASME Y14:2001 pdf download SCREW THREAD REPRESENTATION 1.4 Definitions Definitions of terms are in accordance with ASMEB1.7M and the applicable standard. 2 THREAD TYPES 2.1 Straight Threads Straight 60 deg screw thread designations for drawings are based...

ASME Y14.100:2001 pdf download ENGINEERING DRAWING PRACTICES 3 DEFINITIONS acceplarce. the act of an authorized represenalive ofthe receiving activity to take ownership of suppliestcndcred, or approve specific services rendered, as partialor complete performancc of the contract. altered...

ASME Y14-6:2001 pdf download SCREW THREAD REPRESENTATION 1.4 Definitions Definitions of terms are in accordance with ASMEB1.7M and the applicable standard. 2 THREAD TYPES 2.1 Straight Threads Straight 60 deg screw thread designations for drawings are based...

ASME A112.18.2:2002 pdf download PLUMBING FIXTURE WASTE FITTINGS 1 GENERAL 1.1 Scope This Standard establishes performance rcquiremcntsand test mcthods for plumbing fxturc waste fittingssuch as, but not limited to: bathtub waste and overflowdrains; traps; trap wall adapters;...