Free Standards Download

ASME B89.7.4.1:2005 pdf download Measurement Uncertainty and Conformance Testing: Risk Analysis 1 SCOPE This Technical Report provides guidelines for settinggauging (or test) limits in support of accept/reject decisions in workpiece inspections, instrument verificationsand general conformance tests where...

ASME B107.4:2005 pdf download Driving and Spindle Ends for Portable Hand, Impact, Air, and Electric Tools (Percussion Tools Excluded) 1 SCOPE This Standard applies to portable power tools fordrilling, grinding， polishing, sawing, and drivingthreaded fasteners and hand...

ASME B107.8:2003 pdf download ADJUSTABLE WRENCHES DEFINITIONS See Fig. 1 as applicable. adjustab/e jaw: movable portion of the wrench that con-tacts the fastener.adjusting worm. portion of the wrench used to adjust theclearance between the fixed and adjustable...

ASME B107.10:2005 pdf download Handles and Attachments for Hand Socket Wrenches 4.5.1 Surface Finish. All surfaces shall have a maximum roughness of 200 in. when tested per para, 5.6As a guideline, buffed or polished surfaces shall havea...

ASME B107.12:2004 pdf download Nutdrivers 4.1.3 Type I: Stubby Length, Type Il nutdrivers shallconsist of round steel shaft with socket at one end anda handle at the other end. A bolt cearance hole shall beprovided in the...

ASME B107.18:2003 pdf download PLIERS: WIRE TWISTER Wire twister pliers shall incorporate a device, whichwhen actuated, will cause the pliers to rotate about itslongitudinal axis. The halves of the pliers shall be permnanently joined with a through...

ASME B107.21:2005 pdf download Wrench, Crowfoot 4.6 Finish Wrenches shall be free from rust, burrs, pitts, nodulesblisters, cracks, or other conditions that may impair serviceability, safety, durability, or appearance. 4.6.1 Surface Finish. Forge flash shall be completelyremoved...

ASME B107.27:2003 pdf download PLIERS: MULTIPLE POSITION, ELECTRICAL CONNECTOR SCOPE This Standard provides performance and safetyrequirements for pliers (also known as Cannon PlugPliers) that are used primarily for connecting or disconnecting threaded lock collars of electrical connectors.Inclusion...

ASME B107.28:2005 pdf download Electronic Torque Instruments 1 SCOPE This Standard provides performance and safetyrequirements for manually operated electronic torqueinstruments with integral or interchangeable heads.Itincludes requirements for endurance, torque valueranges, and accuracy for these torque instruments.It isnot...

ASME B107.29:2005 pdf download Electronic Tester, Hand Torque Tools 5.3 Accuracy Tests The tester shall pass the tests in para. 6. The accuracytest shall be conducted at a minimum of three valuesincluding both ends of the usable...