Free Standards Download

AWS A5.5-A5.5M-2006 pdf download

This specification prescribes the requirements for classification of low-alloy steel covered electrodes used for shielded metal arc welding. The requirements include chemical composition and mechanical properties of weld metal, weld metal soundness, usability tests of electrodes, and...

03-12

AWS PRGWA-QA-2001 pdf download

This publication is designed to provide information in regard to the subject matter covered. It is made available with the understanding that the publisher is not engaged in the rendering of professional advice. Reliance upon the information...

03-11

AWS PRGVT-1999 pdf download

03-11

AWS PRGC-1999 pdf download

03-11

AWS F3.2-2001 pdf download

This document introduces the reader to various types of ventilation systems, including general supply and exhaust and local exhaust, for control of welding fumes. It contains or refers to information on air contaminants found in the welding...

03-11

AWS D17.1-2001 pdf download

This specification provides the general welding requirements for welding aircraft and space hardware. It includes but is not limited to the fusion welding of aluminum-based, nickel-based, iron-based, cobalt-based, magnesium-based, and ti- tanium-based alloys using electric arc and...

03-11

AWS D10.7-2000 pdf download

This document presents information concerning those properties of aluminum which affect its weldability and which cause specific problems in the fabrication of aluminum pipe. Recommendations are made for solving these problems and suggested procedures are presented for...

03-11

AWS C5.2-2001 pdf download

This revised recommended practice provides information regarding current practices for plasma arc cutting and gouging. The document explains the basic principles of operation, methods of operation, system components and their installa- tion, optimization of cut quality, and...

03-11

AWS B5.2-2001 pdf download

This specification defines the requirements and program for an employer (company) to qualify Welding Inspector Specialists and Welding Inspector Assistants to contract or industry-specific inspector standards. The qualification program is developed and controlled by an employer. The...

03-11

AWS B2.1-8-216-2001 pdf download

This standard contains the essential welding variables for austenitic stainless steel in the thickness range of 1/8 through 1-1/2 inch, using manual gas tungsten arc welding with consumable insert root followed by shielded metal arc welding. It...

03-11